Royal Gourmet MG5001-R Mirage 5-Burner Gas Grill with Infrared Burner User Guide
- October 30, 2023
- Royal Gourmet
Table of Contents
Royal Gourmet MG5001-R Mirage 5-Burner Gas Grill with Infrared Burner
Mirage 5-Burner Gas Grill with Infrared Burner
FOR YOUR SAFETY!
Use outdoors only! Do not use it in a building, garage or any other enclosed
areas. Read the instructions before assembling and using the appliance. DO NOT
use the grill unless it is completely assembled and all the parts are securely
fastened. This grill will become very hot, do not move it during operation.
Keep children and pets away.
CONTACT US FIRST!
This grill has been made to high quality standards. If you have any questions
that are not addressed in this manual, or you need parts, please call our
customer service hotline or send an email to
service@royalgourmetusa.com
Explosion View
Parts List Hardware List
PREPARATION
Before beginning assembly, make sure all parts are present. Compare parts with packaged contents list and diagram above. If any parts are missing or damaged, do not attempt to assemble the products. Contact customer service for replacement parts via telephone or email.
- Estimated assembly time: 40 minutes
- Tools required for assembly: Phillips Screwdriver (not included) and Wrench (not included)
- Note: The right and left sides of the grill are designed as if you are facing the front of the grill.
ASSEMBLY INSTRUCTIONS
- Assemble the casters (1) to bottom shelf (2) with 16 bolts (A).
- Assemble side shelf right (3) and side shelf left (4) to bottom shelf with 8 bolts (B).
- Assemble the rear shelf (5) to side shelf and bottom shelf with 4 bolts (A) and 2 bolts (B).
- Install the magnet (E) to shown position of bottom shelf with 2 bolts (G).
- Assemble the cart front beam ( 6 ) to side shelves with 4 bolts (D). Assemble the firebox braces 7 ) to side shelves with 8 bolts (A). Please note : make the bolts (D) insert throngh the firebox braces.
- Assemble the door handles (10), handle bases (11) to left and right doors ( 8 ) ( 9 ) with 4 bolts (B). Screw 2 (H) underneath the doors.
- Assemble the doors: connect to bottom shelf via H connect to front beam by 3 (F).
- Assemble the grease cup base (12) to right side shelf, underneath firebox brace with 6 bolts (A).
- Place the grease cup (13) onto the base.
- Place the grease tray (14) onto the firebox brace.
- Assemble handle brackets (33) to lid with 4 bolts (A).
- Insert the lid handle (32) to handle brackets, secure them from inside of the lids with 2 bolts (B).
- Assemble the thermal baffle (15) underneath the firebox with 2 bolts (G).
- Place the firebox onto the braces, fasten it with 4 bolts (A). Screw 4 bolts (1) halfway to both upper sides of firebox, for assembling side table/burner.
- Align and hang the side burner shelf (17) onto the halfway bolts (I), and secure them. Fasten it with another 2 bolts (1) as shown.
- Align and hang the side table (18) onto the halfway bolts (I), and secure them. Fasten it with another 2 bolts (I) as shown.
- Make the tube terminal insert to the side burner brace (20), secure it with 1 nut (L).
- Connect the tube terminal to the side burner, fasten the side burner brace underneath the side burner shelf with 2 bolts (G). Place the side burner grate back to the side burner shelf.
- Insert the ignition line to the electrode hole as shown.
- Assemble the rear burner (21) to the firebox with 2 bolts (G).
- Assemble the rear burner electrode (22) to firebox with 1 bolt (G).
- Make the tube insert through the rear board (23), fasten the rear board to firebox and side shelves with 4 bolts (A).
- Connect the tube terminal to the rear burner, secure it with 1 nut (L).
- Insert the ignition line to the electrode hole of rear burner as shown.
- Assemble the rear burner board (24) to firebox with 5 bolts (G). Please note, fasten the bolts inside the firebox.
- Place the flame tamers (25) into the firebox.
- Place the cooking grates (26) into the firebox.
- Place the warming rack (27) into the firebox.
- Assemble the thermometer (28) to the lid.
- Put the AA battery (C) into the igniter.
- Install tank base lower (30) to the bottom shelf with 2 bolts (B). Install tank base upper (29) to the bottom shelf with 2 bolts (B).
- Insert the extension wire (34) to the left door.
Assemble the grill rotisserie bases (31) to the firebox Recommended length for the grill rotisserie is 35.5″. Grill rotisserie is not included.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>