TP-Link Archer A54 Wireless Dual-Band Router Quick Installation Guide

TP-Link Archer A54 Wireless Dual-Band Router

Set up with videos: Scan the QR code or visit https://www.tp- link.com/support/setup-video/#wi-fi-routers to search for the setup video of your product.

Router Mode

• If your internet comes from an Ethernet outlet, connect the router’s WAN port to it, then follow steps 4 and 5 to complete the hardware connection.
• If you want to configure this new router to extend your network, refer to the Access Point Mode and Range Extender Mode sections on the back page.

Images may differ from actual products.

Verify that the following LEDs stay solid on to confirm the hardware is connected correctly.
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi- Fi button on the rear panel for about 5 seconds, then release the button. Both LEDs will turn on.

Configure the router
Connect your computer to the router (Wired or Wireless)

• *  **Wired**  

  Turn off the Wi-Fi on your computer and connect it to the router via an Ethernet cable.

  • Wireless
    Find the product label at the bottom of the router.

  • Use the default SSID (network name) and wireless password to join the network.
    Tip: If you are using a smartphone or tablet, you can also scan the QR code to join the preset 2.4GHz network directly.

• Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.
  Note: If the login window does not appear, please refer to FAQ > Q1.

• Run the Quick Setup, select Wireless Router, and follow the step-by-step instructions to set up the internet connection.

Access Point Mode

In this mode, the router transforms your existing wired network into a wireless one.

• Power on the router.
• Connect the router’s WAN port to your wired router’s Ethernet port via an Ethernet cable as shown above.
• Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password printed on the label at the bottom of the router.
• Launch a web browser and enter http://tplinkwifi.net in the address bar. Create a password to log in.
• Run the Quick Setup, select Access Point, and follow the step-by-step instructions of the Quick Setup to set up the internet connection.
  Tip: You can also go to Operation Mode to switch to Access Point Mode.

Connect to the wireless network by using the SSID (network name) and password of the router.

Range Extender Mode

In this mode, the router boosts the existing wireless coverage in your home.

Configure

• Place the router next to your host router and power it on.
• Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password printed on the label at the bottom of the router.
• Launch a web browser and enter http://tplinkwifi.net in the address bar. Create a password to log in.
• Run the Quick Setup, select Range Extender, and follow the step-by-step instructions of the Quick Setup to set up the internet connection.
  Tip: You can also go to Operation Mode to switch to Range Extender Mode.

Relocate

Place the router about halfway between your host router and the Wi-Fi “dead” zone. The location you choose must be within the range of your existing host network.

Tether App

TP-Link Tether app provides a simple, intuitive way to access and manage your router.

• Block unwelcome users from connecting to your network
• Change the basic wireless network settings
• View information about clients connected to your router
• Set up Parental Controls with access time

How to begin?

• Download the TP-Link Tether app from the Apple App Store or Google Play, or simply scan the QR code.
• Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
• Connect your device to the router’s wireless network.
• Go back to the Tether app, log into your router, and start managing your home network.

Scan for Tether

TROUBLESHOOTING (FAQ)

What can I do if the login window does not appear?

• Reboot your router and try again.
• If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically.
• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter.
• Use another web browser and try again.
• Disable then re-enable the network adapter being used.

What can I do if I cannot access the internet?

• Reboot your modem and router, then try again.
• Check if the internet is working properly by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your internet service provider.
• Log in to the web management page of the router, and go to the Status page to check whether the WAN IP address is valid or not. If it is, please run the Quick Setup again; otherwise, recheck the hardware connection. For cable modem users, log in to the web management page of the router. Go to Network > MAC Clone, click Clone MAC Address and click Save, then reboot both the modem and the router.

How do I restore the router to its factory default settings?

• While the router is powered on, press and hold the RESET button on the rear panel of the router until all LEDs turn off, then release the button.
• Log in to the router’s web management page. Go to System Tools > Factory Defaults, and click Restore. The router will restore and reboot automatically.

What can I do if I forgot my web management password?

• Refer to Q3 to reset the router, then create a new password to log in.

What can I do if I forgot my wireless network password?

• The default Wireless Password is printed on the product label of the router.
• Connect a computer to the router via an Ethernet cable. Log in to the router’s web management page, and go to Wireless 2.4GHz (or Wireless 5GHz) > Wireless Security to obtain or reset your wireless password.

To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.

FREQUENTLY ASKED QUESTIONS

What is the TP-Link Archer A54 Wireless Dual-Band Router?

The TP-Link Archer A54 is a wireless dual-band router that provides high-speed internet connectivity and reliable wireless coverage for homes and small offices.

What is the maximum wireless speed supported by the Archer A54 router?

The TP-Link Archer A54 router supports a maximum wireless speed of up to 1200 Mbps, with 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band.

Does the TP-Link Archer A54 router support dual-band connectivity?

Yes, the TP-Link Archer A54 router supports dual-band connectivity, allowing devices to connect to both the 2.4 GHz and 5 GHz bands simultaneously.

Can I connect multiple devices to the TP-Link Archer A54 router at the same time?

Yes, the TP-Link Archer A54 router supports multiple device connections, allowing you to connect multiple devices such as smartphones, laptops, tablets, and smart home devices concurrently.

Does the TP-Link Archer A54 router have Ethernet ports?

Yes, the TP-Link Archer A54 router is equipped with multiple Ethernet ports, allowing you to connect wired devices like computers, gaming consoles, or smart TVs for a stable and reliable internet connection.

Does the TP-Link Archer A54 router support advanced security features?

Yes, the TP-Link Archer A54 router includes security features such as WPA/WPA2 encryption, firewall protection, and Access Control to help protect your network from unauthorized access and potential threats.

Can I set up parental controls on the TP-Link Archer A54 router?

Yes, the TP-Link Archer A54 router supports parental controls, allowing you to manage and restrict internet access for specific devices or users based on customizable settings.

Is the TP-Link Archer A54 router easy to set up?

Yes, the TP-Link Archer A54 router features a user-friendly web interface and a Quick Setup wizard, making it easy to set up and configure the router even for users with limited technical knowledge.

Can I set up a guest network with the TP-Link Archer A54 router?

Yes, the TP-Link Archer A54 router supports guest network functionality, allowing you to create a separate WiFi network for guests while keeping your main network secure.

Does the TP-Link Archer A54 router support IPv6?

Yes, the TP-Link Archer A54 router supports IPv6, the latest version of the Internet Protocol, which offers improved address space and network connectivity.

Can I manage and control the TP-Link Archer A54 router remotely?

Yes, the TP-Link Archer A54 router supports remote management, allowing you to monitor and control your network settings from anywhere using a web interface or the TP-Link Tether mobile app.

Does the TP-Link Archer A54 router have USB ports?

No, the TP-Link Archer A54 router does not have USB ports. It is a basic router without USB functionality.

Does the TP-Link Archer A54 router support Quality of Service (QoS)?

Yes, the TP-Link Archer A54 router supports QoS features, allowing you to prioritize certain devices or applications to ensure they receive optimal bandwidth and network performance.

Can I use the TP-Link Archer A54 router with a VPN (Virtual Private Network)?

Yes, the TP-Link Archer A54 router supports VPN passthrough, which allows you to connect to a VPN server using devices connected to the router.

Does the TP-Link Archer A54 router support mesh networking?

No, the TP-Link Archer A54 router does not support mesh networking. It is a standalone router without mesh capabilities.

DOWNLOAD THE PDF LINK:TP-Link Archer A54 Wireless Dual-Band Router Quick Installation Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>