TP-Link Deco PX50 Wireless WiFi Routers and Extenders User Guide

TP-Link Deco PX50 Wireless WiFi Routers and Extenders

About This Guide

This guide provides a brief introduction to the Whole Home Deco Mesh Wi-Fi 6 System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.

Conventions

In this guide, the following conventions are used:

redirect to a website or a specific section.

Teal

| Key information appears in teal, including management page text such as menus, items, buttons, and so on.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

More Info

• Specific product information can be found on the product page at https://www.tp-link.com.
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com.
• Our Technical Support contact information can be found at the Help Center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support.

1. Speed/Coverage/Device Quantity Disclaimer
   Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and the number of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

2. MU-MIMO Disclaimer
   The use of MU-MIMO requires clients to also support MU-MIMO.

3. IoT Compatibility Disclaimer
   IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.

4. Seamless Roaming Disclaimer
   Clients need to support 802.11k/v/r and may require additional setup. Performance may vary depending on the client’s device.

5. HomeShield Disclaimer
   HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information.

Appearance:

Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, a power slot, and a Reset button.

See the explanation below:

Tip: The product label can be found at the bottom of the product.

Set Up Your Deco

First, let’s start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup.

1. Get the Deco app
   Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet.

2. Log in or sign up with TP-Link ID
   Open the app and log in with your TP-Link ID. If you don’t have a TP-Link ID, create one first.
   Note: If you forgot your login password, tap Forgot Password? The app will help you reset your password.

3. Select your Deco model
   Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network.

4. Plug in your Deco
   Power off your modem. Connect your Deco to the modem and power them both on. If you don’t have a modem, connect your Deco directly to the Ethernet outlet .

5. Connect to your Deco’s Wi-Fi
   Connect your phone/tablet to the Deco’s Wi-Fi using the default SSID printed on the product label.

6. Specify your Deco’s location
   Select or customize a location for your Deco. The location will be used as the name of your Deco.

7. Connect your Deco to the internet
   Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.

8. Create your Wi-Fi network
   Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.

9. Connect to your Wi-Fi network
   Connect your phone/tablet to the Deco’s Wi-Fi.

10. Setup complete
    Your Deco network is now up. You can connect your devices to the Deco network .

11. Add more Decos
    Plug in the other included Decos, and they will automatically join the network within 2 minutes.

Troubleshooting

Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support

Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn’t find Deco”?

Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM

Q2. What should I do if I fail to configure the satellite Deco and get stuck on “We couldn’t find another Deco”?

Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4

Q3. What should I do if I fail to configure the main Deco and get stuck on “Testing Internet Connection”?

Refer to the video https://youtu.be/OSUrGdWH-i0

Q4. What should I do if my wireless devices cannot connect to Deco?

Refer to the guide https://www.tp-link.com/support/faq/2718/

Q5. What should I do if Deco suddenly lost internet access?

Refer to the guide https://www.tp-link.com/support/faq/1454/

Q6. How can I find a suitable spot for my Deco?

Refer to the guide https://www.tp-link.com//support/faq/1446/

Q7. What can I do if the Deco app isn’t working properly?

Refer to the guide https://www.tp-link.com/support/faq/1456/

Authentication

FCC Compliance Information Statement

• Product Name: AX3000+G2000 Whole Home Powerline Mesh Wi-Fi 6 System
• Model Number: Deco PX50
• Responsible party: TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: http://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY(the maximum transmitted power)

• 2412MHz—2472MHz (20dBm)
• 5150MHz—5350MHz (23dBm)

Frequency band 5150 – 5250 MHz:

Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure, or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

Frequency band: 5250 – 5350 MHz:

Indoor use: Inside buildings only. Installations and use in road vehicles, trains, and aircraft are not permitted. Outdoor use is not permitted.

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU, and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device is used at 20 cm from your body.

National restrictions

Attention: This device may only be used indoors in all EU member states and EFTA countries, and Northern Ireland.

| AT| BE| BG| CH| CY| CZ| DE| DK
---|---|---|---|---|---|---|---|---
EE| EL| ES| FI| FR| HR| HU| IE
IS| IT| LI| LT| LU| LV| MT| NL
NO| PL| PT| RO| SE| SI| SK| UK(NI)

UKCA Mark

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca/

National restrictions

Attention: This device may only be used indoors in Great Britain.

UK

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Industry Canada Statement:
CAN ICES-3 (B)/NMB-3(B)

NCC Notice & BSMI Notice:

Equipment name: AX3000+G2000 Whole Home Powerline Mesh Wi-Fi 6 System

Type designation (Type): Deco PX50

Unit|
---|---

Lead (Pb)

|

Mercury (Hg)

|

Cadmium (Cd)

|

Hexavalent chromium

(Cr+6)

|

Polybrominated biphenyls

(PBB)

|

Polybrominated diphenyl ethers

(PBDE)

PCB| ○| ○| ○| ○| ○| ○
| ○

−

| ○| ○| ○| ○| ○
| −| ○| ○| ○| ○| ○
1. 0.1 wt %”0.01 wt %| | ○| ○| ○| ○| ○

Note 1： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicates that the percentage content of the restricted substance exceeds the reference percentage value of a present condition.

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of the reference value of presence.

Note 3：The “ − ” indicates that the restricted substance corresponds to the exemption.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Operating Temperature: 0°C~40°C (32°F~104°F)
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

FREQUENTLY ASKED QUESTIONS

What is the maximum wireless speed supported by the TP-Link Deco PX50 Wireless WiFi Routers and Extenders?

The TP-Link Deco PX50 Wireless WiFi Routers and Extenders support a maximum wireless speed of up to 2400 Mbps.

How many units are included in a TP-Link Deco PX50 system?

A TP-Link Deco PX50 system typically includes two units, which can be used as both routers and extenders to create a mesh network.

Can I add additional units to expand the coverage of my TP-Link Deco PX50 system?

Yes, you can add more TP-Link Deco PX50 units to your system to expand the coverage and create a larger mesh network.

Does the TP-Link Deco PX50 support tri-band connectivity?

Yes, the TP-Link Deco PX50 routers and extenders support tri-band connectivity, allowing for simultaneous connection on one 2.4 GHz band and two 5 GHz bands.

Can I set up a guest network with the TP-Link Deco PX50 system?

Yes, the TP-Link Deco PX50 system allows you to create a separate guest network, providing internet access to your guests while keeping your main network secure.

Does the TP-Link Deco PX50 system support advanced security features?

Yes, the TP-Link Deco PX50 system supports advanced security features, such as WPA3 encryption and a built-in antivirus system to protect your network from threats.

Can I manage and control the TP-Link Deco PX50 system remotely?

Yes, you can manage and control the TP-Link Deco PX50 system remotely using the TP-Link Deco mobile app, allowing you to monitor and adjust network settings from anywhere.

Is the TP-Link Deco PX50 system compatible with voice assistants?

Yes, the TP-Link Deco PX50 system is compatible with voice assistants like Amazon Alexa and Google Assistant, allowing you to control certain features using voice commands.

Does the TP-Link Deco PX50 system support parental controls?

Yes, the TP-Link Deco PX50 system includes robust parental control features that allow you to manage and restrict internet access for specific devices or users.

Can I prioritize specific devices or applications with the TP-Link Deco PX50 system?

Yes, the TP-Link Deco PX50 system allows you to prioritize certain devices or applications, ensuring they receive optimal network bandwidth for improved performance.

Does the TP-Link Deco PX50 system support seamless roaming?

Yes, the TP-Link Deco PX50 system supports seamless roaming, allowing devices to automatically connect to the strongest WiFi signal as you move around your home.

Can I connect devices to the TP-Link Deco PX50 system using Ethernet cables?

Yes, the TP-Link Deco PX50 routers and extenders include Ethernet ports, allowing you to connect devices directly for a wired internet connection.

Does the TP-Link Deco PX50 system have a built-in firewall?

Yes, the TP-Link Deco PX50 system includes a built-in firewall to protect your network from unauthorized access and potential threats.

Can I set up a VPN (Virtual Private Network) with the TP-Link Deco PX50 system?

Yes, the TP-Link Deco PX50 system supports VPN pass-through, allowing you to connect to a VPN server for enhanced privacy and security.

Is the TP-Link Deco PX50 system compatible with older WiFi standards?

Yes, the TP-Link Deco PX50 system is backward compatible with older WiFi standards, ensuring compatibility with a wide range of devices.

VIDEO – PRODUCT INTRODUCTION

DOWNLOAD THE PDF LINK:TP-Link Deco PX50 Wireless WiFi Routers and Extenders User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>