WINGBO WBWL-GL05-BK 3-Light Vanity Wall Light Instruction Manual
- June 12, 2024
- WINGBO
Table of Contents
**WINGBO WBWL-GL05-BK 3-Light Vanity Wall Light Instruction Manual
**
ASSEMBLY INSTRUCTIONS
WARNING:
- Check for electric, gas, & plumbing lines before drilling or consult a professional.
- Turn off your electricity at the circuit breaker or main fuse box before installation. Do not restore power to the line until the light has been fully installed.
This fixture has been rated for up to 3.8*3-Watt maximum light with LED SMD
2835
The lighting fixture is meant for indoor use.
ASSEMBLY
Please follow the steps (1-5) to install the lighting fixture
- To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning.
- Take the wall bracket off the canopy, Connect your wall bracket to your junction box (not included) using the provided screws.
- Make electrical connections using the wire nuts.
- Being careful that no wiring is left exposed, place the canopy against the mounting surface. Secure the canopy to the wall bracket with the 2 previously removed ball nuts.
- Install the shade to the socket
Thanks for your purchase!
Should you have any questions or concerns, please do not hesitate to contact
us by mail address
support@wingbolighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>