ZKTeco ZKBio CVSecurity 5.4.0 R User Guide
- June 12, 2024
- ZKTECO
Table of Contents
New Features and Updates for ZKBio CVSecurity 5.4.0_R
Previous Version: ZKBioSecurity 5.3.0_R
Date: April 2023 Doc Version: 2.0 English
ZKBio CVSecurity 5.4.0
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
Copyright © 2023 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be
copied or forwarded in any way or form. All parts of this manual belong to
ZKTeco and its subsidiaries (hereinafter the “Company” or “ZKTeco”).
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual
are owned by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the
ZKTeco equipment. The copyright in all the documents, drawings, etc. in
relation to the ZKTeco supplied equipment vests in and is the property of
ZKTeco. The contents hereof should not be used or shared by the receiver with
any third party without express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the
operation and maintenance of the supplied equipment. If any of the content(s)
of the manual seems unclear or incomplete, please contact ZKTeco before
starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and
maintenance that the operating and maintenance personnel are fully familiar
with the design and that the said personnel have received thorough training in
operating and maintaining the machine/unit/equipment. It is further essential
for the safe operation of the machine/unit/equipment that personnel has read,
understood, and followed the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the
contract specifications, drawings, instruction sheets or any other contract-
related documents, the contract conditions/documents shall prevail. The
contract- specific conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee, or representation regarding the
completeness of any information contained in this manual or any of the
amendments made thereto. ZKTeco does not extend the warranty of any kind,
including, without limitation, any warranty of design, merchantability, or
fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the
information or documents which are referenced by or linked to this manual. The
entire risk as to the results and performance obtained from using the
information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any
incidental, consequential, indirect, special, or exemplary damages, including,
without limitation, loss of business, loss of profits, business interruption,
loss of business information or any pecuniary loss, arising out of, in
connection with, or relating to the use of the information contained in or
referenced by this manual, even if ZKTeco has been advised of the possibility
of such damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the
information herein which will be incorporated into new additions/amendments to
the manual. ZKTeco reserves the right to add, delete, amend, or modify the
information contained in the manual from time to time in the form of
circulars, letters, notes, etc. for better operation and safety of the
machine/unit/equipment. The said additions or amendments are meant for
improvement /better operations of the machine/unit/equipment and such
amendments shall not give any right to claim any compensation or damages under
any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment
malfunctions due to any non-compliance of the instructions contained in this
manual (ii) in case of operation of the machine/unit/equipment beyond the rate
limits (iii) in case of operation of the machine and equipment in conditions
different from the prescribed conditions of the manual.
The product will be updated from time to time without prior notice. The latest
operation procedures and relevant documents are available on
http://www.zkteco.com.
If there is any issue related to the product, please contact us.
ZKTeco Headquarters
Address
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 – 82109991
Fax +86 755 – 89602394
For business-related queries, please write to us at
sales@zkteco.com.
To know more about our global branches, visit
www.zkteco.com.
About the Company
ZKTeco is one of the world’s largest manufacturers of RFID and Biometric
(Fingerprint, Facial, and Fingervein) readers. Product offerings include
Access Control readers and panels, Near & Far-range Facial Recognition
Cameras, Elevator/floor access controllers, Turnstiles, License Plate
Recognition (LPR) gate controllers and Consumer products including battery-
operated fingerprint and face-reader Door Locks.
Our security solutions are multi-lingual and localized in over 18 different
languages. At the ZKTeco stateof-the-art 700,000 square foot ISO9001-certified
manufacturing facility, we control manufacturing, product design, component
assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and
development of biometric verification procedures and the productization of
biometric verification SDK, which was initially widely applied in PC security
and identity authentication fields. With the continuous enhancement of the
development and plenty of market applications, the team has gradually
constructed an identity authentication ecosystem and smart security ecosystem,
which are based on biometric verification techniques. With years of
experience in the industrialization of biometric verifications, ZKTeco was
officially established in 2007 and now has been one of the globally leading
enterprises in the biometric verification industry owning various patents and
being selected as the National High-tech Enterprise for 6 consecutive years.
Its products are protected by intellectual property rights.
About the Manual
This manual introduces the New Features and Updates for ZKBio CVSecurity
5.4.0_R.
All figures displayed are for illustration purposes only. Figures in this
manual may not be exactly consistent with the actual products.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Software
Convention| Description
Bold font| Used to identify software interface names e.g., OK, Confirm,
Cancel.
| Multi-level menus are separated by these brackets. For example, File > Create > Folder.
< >| Button or key names for devices. For example, press
For Device
Convention| Description. [ ]| Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window. /| Multi-level menus are separated by forwarding slashes. For example, [File/Create/Folder].
Symbols
| Convention | Description |
|---|---|
| This represents a note that needs to pay more attention to. | |
| The general information which helps in performing the operations faster. | |
| The information which is significant. | |
| Care taken to avoid danger or mistakes. | |
| The statement or event that warns of something or that serves as a |
cautionary example.
Precautions When Upgrading ZKBio CVSecurity
- ZKBio Security V5000 3.0.0_R (except Video and VMS modules) can be upgraded to ZKBio CVSecurity.
- ZKBio Security 3.2.0.0 cannot be upgraded directly to ZKBio CVSecurity.
Current Version
| Upgrade Path|
Upgrade Method
---|---|---
ZKBioSecurity 3.2.0.0_R| ZKBioSecurity V5000 4.1.R >
ZKBio CVSecurity 5.3.0_R| 1. Using ZKBioSecurity V5000 4.1.x_R migration
data function to upgrade from 3200 to V5000 4.1.x_R;
2. Then overwrite installation with ZKBio CVSecurity 5.3.0_R
ZKBioSecurity V5000 2.0.x_R
ZKBioSecurity V5000 3.0.x_R| ZKBio CVSecurity 5.3.0_R| Using overwrite
installation method with ZKBio CVSecurity 5.3.0_R
ZKBioSecurity V5000 4.0.x_R
ZKBioSecurity V5000 4.1.x_R
ZKBio CVSecurity 5.0.0_R
ZKBio CVSecurity 5.1.1_R
ZKBio CVSecurity 5.2.0_R
Key Updates
No.| Update Module| Features| Submenu| Key
Updates
---|---|---|---|---
1
| Smart Video Surveilla nce| ****
User Permission managemen t
| Video Preview| Added permission management for video
preview, PTZ control, snapshot, recording, digital zoom, intercom.
2
| Video Playback| Added permission management for video playback, video
backup, snapshot, digital zoom.
3| Device
Management| Added permission management for NVR and IPC management.
4
| ****
Other pages
| Added permission management (such as new,fresh,edit icon) for all key features to manage more detailed.
5
| ****
Menu Adjustment
| Behavior analysis
configuration| Menu adjustment for keeping the consistency with ZK NVR
configuration.
Crowd situation
configuration
6
| Device Management| Device connection| Added to support the connection for ZK 16/32CH NVR 2HDD models.
7
| Video Playback| Video retrieval| Added to support ZK NVR for fast retrieval of target video by human & vehicle alarms,
marked by different color in the play bar.
8
| | Decode on the wall| Large screen control| Support configuration of alarm linkage to video wall window, the triggered alarm to automatically decode to video wall floating
window to display (by ZK Dedocer)
---|---|---|---|---
9
| Intelligent Analytics| Global Linkage| Added to support BioSense Series intelligent analytics based on human & vehicle targets bidirectional interaction alarm linkage with access control devices. Added to support alarm linkage video on the wall configuration, available to select
channels alarm on the wall and time.
10
| Statistics Analysis| Alarm Report| Added Object Detection alarm, Smart motion (human & vehicle) alarm, Area Detection (human&vehicle) alarm, Line Crossing (human&vehicle) alarm, Target
Couting (human&vehicle) alarm
11| Log| Parameter
Configuration| Added to support CU Request control
on/off, and log request from client side.
Functional Update Details
3.1 User Permission management
3.1.1 Video Preview
Operating Steps:
Step 1: Click System > Authority Manegement >Role > Edit, to open the Role
permission editing page.
Step 2: Click Smart Video Surveillance>Video View>Video Preview , Enter the
permission selection page.
Step 3: Check the permissions that need to be granted to this role.
Step4: Click OK to save the settings
Step 5: Click Close to exit the page.
3.1.2 Video Playback
Operating Steps:
Step 1: Click System > Authority Management >Role > Edit, to open the Role
permission editing page.
Step 2: Click Smart Video Surveillance>Video View>Video playback , Enter the
permission selection page.
Step 3: Check the permissions that need to be granted to this role.
Step 4: Click OK to save the settings
Step 5: Click Close to exit the page.
3.1.3 Device Management
Operating Steps:
Step 1: Click System > Authority Management >Role > Edit, to open the Role
permission editing page.
Step 2: Click Smart Video Surveillance> Device Management>Device/Camera ,
Enter the permission selection page.
Step 3: Check the permissions that need to be granted to this role.
Step 4: Click OK to save the settings
Step 5: Click Close to exit the page.
3.1.4 Other pages
Operating Steps:
Step 1: Click System > Authority Management >Role > Edit, to open the Role
permission editing page.
Step 2: Click Smart Video Surveillance , Enter the permission selection page ,
Such as Group Management
Step 3: Check the permissions that need to be granted to this role.
Step 6: Click OK to save the settings
Step 7: Click Close to exit the page.
3.2 Menu Adjustment
3.2.1 Behavior analysis configuration
Step 1: Click Smart Video Surveillance > Intelligent > Behavior analysis
Intrusion detection/Perimeter line /Object left , Maintain consistency between functional pages and ZK NVR configuration.
3.2.2 Crowd situation configuration
Step 1: Click Smart Video Surveillance > Intelligent > Crowd situation >Line
Crossing Statistics, Maintain consistency between functional pages and ZK NVR
configuration.
3.3 Device Management
Added to support the connection for ZK 16/32CH NVR 2HDD models.
Operation Step:
Step 1:Click Smart Video Surveillance >Device Management>Device to enter the
Device editing page.
Click “NEW” Button: Select option ZKNVR for the device type, and fill in the
corresponding values for other options
Click “Search” Buttom: Click the search button to search for devices within
the local area network
Note: NVR needs to be upgraded to a version that supports accessing ZKBio
CVSecurity software, Please consult technical support engineers for specific
version information.
3.4 Video Playback
3.4.1 Video retrieval
Operation Steps:
Step 1: Click Smart Video Surveillance >Video View >Video playback .
Step 2: Select the corresponding NVR and channel, select the time, and click
Search.
Step 3: On the playback page, right-click and select Intelligent Overlays ,
Select the function display that needs to be turned on.
3.5 Decode on the wall
3.5.1 Large screen control
Step 1: Click Smart Video Surveillance > Intelligent >Global Linkage
Step 2: Click the “New” button to enter the linkage settings page. select
Linkage on wall module
Step 3: input the linkage name
Step 4: Select linkage trigger type and Device
Step 5: Select the device that pops up in the wall
Step 6: Select the device that pops up
Step 7:Click Decoding on the wall>Large screen control Enter TV Wall page.
Step 8:Drag the Floating Windows to the specified page, click on the Alarm Set
button and click on the Sync layout and All on wall buttons.
3.6 Intelligent Analytics
Step 1: Click Smart Video Surveillance > Intelligent >Global Linkage
Step 2:Click the “New” button to enter the linkage settings page. select Video
Linkage module
Step 3: input the linkage name
Step 4: Select linkage trigger type and Device
Step 5: Choose the method of linkage and Click “ok” button.
When the alarm is triggered, a pop-up message can be seen in the bottom right
corner of any page
3.7 Statistics Analysis
3.7.1 Alarm Report
Step 1: Click Smart Video Surveillance > Statistics >Alarm report
Step 2: Select the device, Time From, and general alarms to view the newly
added Alarm types in the type details.
3.8 Log
Step 1: Click Smart Video Surveillance > Maintenance configuration
Step 2: Select a function and turn it on
Privacy Policy
Notice:
To help you better use the products and services of ZKTeco and its affiliates,
hereinafter referred as “we”, “our”, or “us”, the smart service provider, we
consistently collect your personal information.
Since we understand the importance of your personal information, we took your
privacy sincerely and we have formulated this privacy policy to protect your
personal information. We have listed the privacy policies below to precisely
understand the data and privacy protection measures related to our smart
products and services.
Before using our products and services, please read carefully and understand
all the rules and provisions of this Privacy Policy. If you do not agree to
the relevant agreement or any of its terms, you must stop using our products
and services.
Collected Information
To ensure the normal product operation and help the service improvement, we
will collect the information voluntarily provided by you or provided as
authorized by you during registration and use or generated as a result of your
use of services.
- User Registration Information: At your first registration, the feature template (Fingerprint template/Face template/Palm template) will be saved on the device according to the device type you have selected to verify the unique similarity between you and the User ID you have registered. You can optionally enter your Name and Code. The above information is necessary for you to use our products. If you do not provide such information, you cannot use some features of the product regularly.
- Product information: According to the product model and your granted permission when you install and use our services, the related information of the product on which our services are used will be collected when the product is connected to the software, including the Product Model, Firmware Version Number, Product Serial Number, and Product Capacity Information. When you connect your product to the software, please carefully read the privacy policy for the specific software.
Product Security and Management
- When you use our products for the first time, you shall set the Administrator privilege before performing specific operations. Otherwise, you will be frequently reminded to set the Administrator privilege when you enter the main menu interface. If you still do not set the Administrator privilege after receiving the system prompt, you should be aware of the possible security risk (for example, the data may be manually modified).
- All the functions of displaying the biometric information are disabled in our products by default. You can choose Menu > System Settings to set whether to display the biometric information. If you enable these functions, we assume that you are aware of the personal privacy security risks specified in the privacy policy.
- Only your user ID is displayed by default. You can set whether to display other user verification information (such as Name, Department, Photo, etc.) under the Administrator privilege. If you choose to display such information, we assume that you are aware of the potential security risks (for example, your photo will be displayed on the device interface).
- The camera function is disabled in our products by default. If you want to enable this function to take pictures of yourself for attendance recording or take pictures of strangers for access control, the product will enable the prompt tone of the camera. Once you enable this function, we assume that you are aware of the potential security risks.
- All the data collected by our products is encrypted using the AES 256 algorithm. All the data uploaded by the Administrator to our products are automatically encrypted using the AES 256 algorithm and stored securely. If the Administrator downloads data from our products, we assume that you need to process the data and you have known the potential security risk. In such a case, you shall take the responsibility for storing the data. You shall know that some data cannot be downloaded for sake of data security.
- All the personal information in our products can be queried, modified, or deleted. If you no longer use our products, please clear your personal data.
How we handle personal information of minors
Our products, website and services are mainly designed for adults. Without
consent of parents or guardians, minors shall not create their own account. If
you are a minor, it is recommended that you ask your parents or guardian to
read this Policy carefully, and only use our services or information provided
by us with consent of your parents or guardian.
We will only use or disclose personal information of minors collected with
their parents’ or guardians’ consent if and to the extent that such use or
disclosure is permitted by law or we have obtained their parents’ or
guardians’ explicit consent, and such use or disclosure is for the purpose of
protecting minors.
Upon noticing that we have collected personal information of minors without
the prior consent from verifiable parents, we will delete such information as
soon as possible.
Others
You can visit https://www.zkteco.com/cn/index/Index/privacy_protection.html
to learn more about how we collect, use, and securely store your personal
information. To keep pace with the rapid development of technology, adjustment
of business operations, and to cope with customer needs, we will constantly
deliberate and optimize our privacy protection measures and policies.
Welcome to visit our official website at any time to learn our latest privacy
policy.
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax: +86 755 – 89602394
www.zkteco.com
https://www.zkteco.com/en/
Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.