EVA LOGIK WF96SP Wi-Fi Outdoor Smart Plug User Manual
- June 12, 2024
- EVA LOGIK
Table of Contents
**EVA LOGIK WF96SP Wi-Fi Outdoor Smart Plug User Manual
**
Meet your new smart Plug !
IMPORTANT!
This unit is suitable for outdoor use in damp locations. Do not expose to rain
or immerse in water.
(A) Manual / Program button
Single press: manually turn on/off your device.
(B) Smart Outlet
This is your smart outlet that will be included in your smart home
(C) Protector
Insert in connector when not in use.
Note:
- Our products support Bluetooth quick-fit and 2.4GHz Wi-Fi network.
- Please operate quickly when the white LED indicator flashes rapidly.
- When indicator flash enters the network, complete standard operation within 3 minutes.
- If you failed to connect with Wi-Fi network, please try to operate several times more.
Introduction
The EVALOGIK WF96SP is an enabled 15A(1875W) Resistive outdoor smart plug designed for use seasonal and landscape lighting, porch light, fountains, pumps and other indoor and outdoor plug-in appliances.It’s compatible with LED, halogen, incandescent, xenon, fluorescent and compact fluorescent bulbs. Works with Amazon Alexa, Google Assistant. You can use free App or voice control by Alexa and Google Assistant to operate your devices in your home.
Use our screws and anchor to lock it in the wall.(optional)
Plug the light you want to control into the Smart plug controlled outlet.
NOTE: Plug directly into the outlet, do not use with extension cords.
Specifications
Model: WF96SP
Power: 125VAC, 60Hz
Item Size: 568039mm
Loading: 15A 1875W RESISTIVE OR GENERAL PURPOSE 5A MAX
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Operating Temperature: -4° F~122° F
-
Plug-in the device directly to the wall outlet.
-
Turn on your Phone bluetooth.
-
You’ll see “Devices to be added”—“Go to add”
-
Enter the Wi-Fi Password (Your phone should have connected to the same Wi-Fi first).
-
Wait for the app to connect to your Wi-Fi until it’s 100%.
-
Edit the name of your new smart plug!
SETTING
Restart status: This parameter can access you to set the plug to be
on/off after power failure.
FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body
CAUTION – PLEASE READ!
This device (MP22W) is intended for installation in accordance with the
National Electric Code and local regulations in the United States, or the
Canadian Electrical Code and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation consult a qualified
electrician
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This
device should never be used to control the On/Off status of Medical and/or
Life Support equipment.
OTHER WARNINGS
Risk of Fire / Risk of Electrical Shock / Risk of Burns
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>