Maxima 09362155 Compact Pizza Oven User Manual

June 3, 2024
maxima

09362155 Compact Pizza Oven
User Manual
Maxima 09362155 Compact Pizza Oven

USER MANUAL
GEBRUIKSHANDLEIDING
BEFORE USING THIS PRODUCT YOU SHOULD READ THIS USER MANUAL PROPERLY
ALVORENS U DIT PRODUCT IN GEBRUIK GAAT NEMEN DIENT U EERST AANDACHTIG DEZE GEBRUIKSHANDLEIDING DOOR TE LEZEN

MAXIMA – NIJVERHEIDSWEG 23 A/D – 3641 RP MIJDRECHT – THE NETHERLANDS – +31 (0) 297 253 969
WWW.MAXIMA.COM[email protected]

Introduction

Thank you for purchasing this Maxima product. To ensure optimal and safe use, please read these instructions completely before attempting to install or use this product
All Maxima products are manufactured with great care and are CE certified. As a result, our products meet the legal requirements within the European Union with regard to  safety, health and the environment. In addition, our products are tested and inspected prior to shipment to ensure product quality and safety.
The Maxima Compact Pizza Oven is a professional grade oven and ideally suited for baking Pizza’s and other foods. The oven is easy to place and move around due to its  compact dimensions, making it perfect for small kitchens or semi- commercial use. The cooking chamber is fitted with a firebrick base to ensure crisp and even cooking.
At Maxima we are very proud of our products and are completely committed to providing you with the best products and service possible. Your satisfaction is our number  one priority.
We trust you will enjoy using this product and Thank You for choosing Maxima Kitchen Equipment as your supplier. We hope you will consider Maxima for your future purchases.

Specifications

Name Maxima Compact Pizza Oven
Model 1×40
Product Code 9362150
Power 2000 W
Electrical Input 220 – 240 V / 50 Hz / 1 Phase

Dimensions
(LxWxH)| 580 x 580 x 270 mm| 580 x 580 x 450 mm
Weight| 17 kg| 25.5 kg
Cooking
Chambers| 1| 2
Chamber Size (LxWxH)| 410 x 410 x 110 mm
Temperature Range| 50 – 350 °C
Features| Separate temperature control for each level.
Firebrick base.
Viewing window.
Interior light.

General Safety Regulations

This machine may only be used for the purpose for which it was designed and intended. The manufacturer and supplier are not liable for any damage caused by incorrect  operation and improper use.

  • This is a commercial product and must only be used by a trained professional who has read and fully understands this manual. It must not be used by children or persons  with reduced physical, sensory or mental capabilities.

  • The device is to be used indoors only.

  • WARNING! Keep the machine and electrical plug away from water and other liquids. If either is exposed to a liquid, immediately disconnect the power supply and have  the machine checked by a certified technician.
    Not following these instructions may cause electric shock, or even death.

  • Do not use the machine after it has fallen or is damaged in any other way. Have it checked and repaired by a certified technician.

  • Do not move the appliance while operational.

  • Never try to move or carry the machine by the power cord.

  • Do not place or move the machine on its side, upside-down or tilted (more than 45°).

  • ATTENTION! Do not try to repair the machine yourself unless instructed. This may void warranty or cause hazardous situations.

  • Do not try to open the casing of the machine unless instructed.

  • Do not insert any objects in the casing or openings of the machine.

  • Do not use any extra devices or accessories that are not supplied along with the machine.

  • Never put your hands or other body parts near the moving parts of the machine while operational.

  • Always keep an eye on the machine when in use.

  • Keep all packaging away from children.

  • Dispose of packaging in accordance with local, state and national regulations.

  • Avoid overloading the machine.

  • The electrical installation must satisfy the applicable local, state and national regulations.

  • Switch off the machine before pulling the power plug out of the socket.

  • Always disconnect te power supply when the machine is not in use. To pull the plug out of the socket, always pull on the plug and not on the cable.

  • Do not touch the power plug with wet or damp hands.

  • Keep the power cable away from operating range and do not cover the cable.

  • Make sure the power cable does not come in contact with sharp or hot objects and keep away from open fire.

  • ATTENTION! As long as the power plug is in the electrical socket the machine is connected to the electric grid.

Product Specific Safety Regulations

  • This machine may only be used for its intended purpose: Cooking food.
  • Keep machine away from flammable materials, liquids and gasses.
  • WARNING! High temperatures. Handle with care or risk serious injury.
  • This machine must be grounded before use

First Time Use

  • Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to the machine then immediately contact your supplier. Save all  packaging materials in case the machine needs to be returned or inspected by the freight carrier.
  • Remove any protective film from all surfaces (if applicable).
  • Read this instruction manual completely before attempting to install and operate this product. When in doubt, contact your supplier.
  • If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and  the wall outlet are compatible. If your machine is not supplied with a factory fitted molded plug then a qualified electrical engineer must be contracted to wire the unit to  the power supply.
  • Before using the appliance for the first time, it is recommended to clean the appliance (see chapter “Cleaning and Maintenance”).

Installation

  1. The machine must be positioned on a flat and stable surface.
  2. Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat such as a cooker, oven or radiator.
  3. When positioning the appliance, maintain a distance of at least 10cm (4 inches) between the appliance and walls or other objects for ventilation and ease of use.
  4. Position the machine in such a way that the plug is accessible at all times.
  5. Assemble any required parts (if applicable).
  6. Connect the earth bolt, at the rear of the machine, to the earth leakage circuit breaker. Ask your supplier or a qualified electrician for advice if necessary.
  7. Plug the power plug into the main socket.

Operation

  • Activate the appliance using the “ON/OFF” switch located at the front. If you want to use the timer, simply select the desired time. The machine will then start and stop  automatically (the timer function only works if the general “ON/OFF” switch is deactivated).
  • Select the desired temperature using the thermostat. The 1×40 model is fitted with two thermostats (top and bottom). The 2×40 model is fitted with three thermostats  (top, middle and bottom).
  • When the selected temperature has been reached the indicator will illuminate. Open the door, place your product in the middle of the chamber and close the door.  Remove product when it is cooked as desired.
  • When not in use, switch off the machine.
  • Clean the appliance after use (see chapter “Cleaning and Maintenance”).
  • If the appliance will not be used for a longer period, please remove the plug from the main socket

Troubleshooting

The follow overview will help you understand possible problems. However, only qualified technicians should attempt to open or repair the machine. Contact your supplier when in doubt.

Problem Possible Cause Possible Solution
The appliance does not work. ■ The appliance is switched off.

■ The power supply is interupted.
■ The voltage is not correct.| Activate the appliance.
Check the power supply, plug in power cable.
Use a compatible power source.
The appliance is switched on (indicator is illuminated) but does not get warm.| • Defective thermostat.
• Defective heating element.| Replace part.
Replace part.
The appliance is switched on but the indicator is not illuminated.| • Defective indicator light.| Replace part.
The temperature cannot be set / adjusted.| • Defective thermostat.| Replace part.

Cleaning and Maintenance

  • Maintenance and repairs should only be done by a certified technician.

  • Regularly check and clean the appliance, its parts and accessories (if applicable).

  • Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
    Instead, have it repaired by a certified electrical engineer.

  • Always switch off and disconnect the power supply before cleaning or maintenance.

  • Let the appliance cool down before cleaning or maintenance.

  • ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning agents. Some cleaning agents may leave harmful  residues or cause damage to the machine. Use a food safe detergent instead.

  • ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.

  • ATTENTION! Never hose down the machine or immerse it in water or any other liquid. Do not use a steamer to clean the appliance.

  • ATTENTION! Never let the power cable or power plug get wet or damp.

  • Clean the interior and exterior using a brush or damp cloth. Always dry the appliance, parts and accessories after cleaning using a soft cloth.

Storage

  • Make sure the appliance is cleaned properly before storage.
  • Coil up the power cable and put it away.
  • Store in a cool and dry place.

Discarding

  • When discarding the appliance, do so in compliance with local, state and national regulations.

Guarantee

Thank you for using our products, our company will follow related provisions from our “Aleena Voorwaarden”, and provide you services when you can show us the invoice.
We provide 12-month warranty from the date of purchase (invoice date). In the warranty period, our company is responsible for free parts if there is a device fault or quality  problem of spare parts under correct operation.
The following is not included in the free service:

  1. Damages result from transportation, installation, improper connections.
  2. Component damages caused by failing to provide power and voltage as required in technical data.
  3. Damages caused by disassembling products, adjust or change the mechanical and electrical structures without permission.
  4. Damage caused by improper operation, cleaning and maintenance.
  5. Non-man-made damage, such as damages from abnormal voltage, fire, building collapse, lightning, floods and other natural disasters, and damages from rats and other pests.
  6. Failure in following the manual when operating.
  7. Wearable and expendable parts.
  8. Altered invoice or without invoice.

In line with our policy of continuous development, we reserve the right to alter the product, the packaging or the documentation without prior notice.

MAXIMA
NIJVERHEIDSWEG 23 A/D
3641 RP MIJDRECHT – THE NETHERLANDS
+31 (0) 297 253 969
WWW.MAXIMA.COM[email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

maxima User Manuals

Related Manuals