ENDGAME GEAR OP1we Wireless Gaming Mouse User Guide
- June 12, 2024
- ENDGAME GEAR
Table of Contents
OP1we Wireless Gaming Mouse
User Guide
OP1we Wireless Gaming Mouse
Endgame Gear OP1we User Compliance Guide Thank you for choosing the Endgame
Gear OP1we Wireless Gaming Mouse. This user compliance guide is designed to
ensure your safety and help you use the product in compliance with relevant
regulations. Please read this guide carefully before using the wireless mouse.
Product Specifications: Product Type: Wireless Gaming Mouse/Wireless Gaming
Mouse Dongle, Model No: EGG-OP1WE-BLK, EGG-OP1WEWHT, EGG-RF2, Mouse FCC ID:
2A7CL-EGG003, Dongle FCC ID: 2A7CLEGG002D, Radio Frequency: 2.4GHz SRD,
Operation Frequency Range (MHz): 2405-2475, Antenna Gain (dbi): Dongle: -1.66
dbi, Mouse: 0.95 dbi, Modulation Type: GFSK
Important ergonomic information:
Extended periods of repetitive motion or usage of an improperly set-up
workspace, poor posture, and incorrect work habits may result in physical
discomfort and injury to nerves, tendons, and muscles. If you experience any
pain, numbness, weakness, swelling, burning, cramping, or stiffness in your
hands, wrists, arms, shoulders, neck, or back, consult a qualified health
professional.
Safety Instructions:
Do not immerse the product in any liquid or expose it to heat and/or moisture,
as moisture can corrode the inner electronics. The wireless mouse is not
intended to be used by children under 14 years old unless under the
supervision of an adult. Operate the product within the temperature range of
0°C (32°F) to 40°C (104°F). If exposed to temperatures outside this range,
power off the device until the temperature stabilizes within the specified
operating range.
Proper Handling and Disposal:
Disconnect the USB cable before opening the product and/or move the on/off
switch to the off position. Open the product only in a clean and dry
environment with dry hands. Dispose of batteries, electronic and electrical
equipment at appropriate collection points to enable recycling and prevent
environmental impact. Disassemble the product only to replace the switches.
Compliance Statements:
The Endgame Gear OP1we complies with relevant legal requirements for
Restriction of Hazardous Substances (RoHS), management of waste electronic and
electrical equipment (WEEE), EMC directive, and Product Safety. Contact
Endgame Gear for further details.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help. FCC
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
Warranty and Support:
The Endgame Gear OP1we Wireless Gaming Mouse is covered by a limited warranty
depending on the regulations of your country of purchase. Please refer to the
warranty terms and conditions of your reseller for details.
- For warranty claims or support inquiries, contact Endgame Gear‘s customer service email or visit the support website help.endgamegear.com
Copyright and Authorization:
The copyright of this document belongs exclusively to Pro Gamers ware GmbH. It
is prohibited to copy, use, reproduce, offer, or distribute this design
without written authorization. All rights reserved. Products are manufactured
on behalf of: Pro Gamersware GmbH, Gauss Strasse 1, 10589 Berlin, Germany
info@endgamegear.com Product design & quality
control in EU, Made in China Document Version: v1.0, June 2023 We value your
feedback and are committed to providing you with a safe and enjoyable user
experience. Should you have any questions or need further assistance, please
do not hesitate to contact us. Endgame Gear Contact Information:
- Support Email: customerservice@endgamegear.com
- Support Website: help.endgamegear.com
- Support Discord: discord.gg/endgamegear
NCC Statement: Obtaining certification for low-power radio frequency equipment does not authorize the company, firm, or user to modify the frequency, increase power, or change the characteristics and functions of the original design without approval. The use of low-power radio frequency equipment must not interfere with aviation safety and legitimate communications. If interference is detected, it should be immediately discontinued and improved until the interference is eliminated before resuming use. Legitimate communications refer to wireless radio communications conducted in accordance with telecommunications regulations. Low-power radio frequency equipment must tolerate interference from legitimate communications or industrial, scientific, and medical radio wave-emitting electrical equipment.
Equipment name| Gaming Mouse| Type designation| OP 1
we
---|---|---|---
Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
PCBA| –| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Metal| –| 0| 0| 0| 0| 0
Cables| 0| 0| 0| 0| 0| 0
Note 1. “Exceeding 0.1 wt %’ and “exceeding 0.01 wt W. indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2. “0” indicates that the percentage content of the restricted
substance does not exceed the percentage of reference value of presence.
Note 3. The “-Indicates that the restricted substance corresponds to the
exemption.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>