TP-Link TL-R470T+ Load Balance Broadband Router Installation Guide
- June 12, 2024
- tp-link
Table of Contents
TP-Link TL-R470T+ Load Balance Broadband Router
LED Explanation
Power
- On: Power on
- Off: Power off
System
- Flashing: System running normally
- On/Off: System running abnormally
Package List
- Router
- Ethernet Cable
- Power Adapter
- Installation Guide
For simplicity, we take TL-R600VPN as an example throughout this Guide.
Connection
- Connect the WAN port of the router to the cable or the DSL modem with an Ethernet cable.
- Connect the LAN port of the router to the computer with an Ethernet cable.
- Connect the DC power socket on the router to an electrical outlet with the power adapter provided.
Configuration
-
Connect a PC to a LAN port of the router with an RJ45 cable properly. If your computer is configured with a fixed IP, change it to “Obtain an IP address automatically”.
-
Open a web browser and type the default management address http://192.168.0.1 in the address field of the browser, then press the Enter key.
-
Create a username and a password for subsequent login attempts.
-
Use the username and password set above to log in to the webpage.
-
After a successful login, the main page will appear as shown below, and you can configure the function by clicking the setup menu on the left side of the screen.
Appendix: Troubleshooting
How do I restore the router to its factory default settings?
- With the router powered on, use a pin to press and hold the RESET button (for about 5 seconds) until the System LED lights up and flashes quickly. Then release the button and wait while the router reboots, restoring it to its factory default settings.
- Log in to the web management page of the router. Go to System Tools > Management > Factory Default Restore, and click Factory Restore. The router will restore and reboot automatically.
Why is the Power LED working abnormally?
The Power LED should be lit when the power system is working normally. If it is not, please check the following:
- Make sure that the power cable is connected properly, and the power contact is normal.
- Make sure the voltage of the power supply meets the requirements for the input voltage of the router.
What should I do if I forget the username and password for the router’s web management page?
You can restore the router to factory defaults. The default management address of the router is http://192.168.0.1. You can manually set a new username and password for login. All current settings will be cleared once the router is restored. If you have a backup of your configurations, you can import it after the factory restore is completed.
Why is the web management page not displaying properly?
Please try the following:
- Update your web browser or try a different web browser.
- If pop-ups are being blocked, please lower the security level of your web browser.
What should I do if I can’t access the web management page?
- Check every port LED on the router and make sure the cable is installed properly.
- Try another port on the router and make sure the cable meets the require-ment and works normally.
- Turn off the power. After a while, turn on the power again.
- Make sure the IP address of your PC is set within the subnet of the router.
- If you still cannot access the configuration page, please restore the router to its factory defaults. Then the computer’s IP address should be set as 192.168.0.x (“x” is any number from 2 to 254) and Subnet Mask as 255.255.255.0.
Technical Support
For technical support and other information, please visit http://www.tp- link.com/support, or simply scan the QR code.
Safety Information
Use only power supplies that are provided by the manufacturer and in the original packing of this product. Do not use a damaged charger or USB cable to charge the device. The adapter shall be installed near the equipment and be easily accessible.
Cautions
Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, and 2011/65/EU. The original EU declaration of Conformity may be found at http://www.tp-link.com/en/ce
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Explanation of the symbols on the product label
FAQ’s
What is the TP-Link TL-R470T+ Load Balance Broadband Router?
The TP-Link TL-R470T+ is a load balancing router designed to provide high- speed and reliable internet connectivity by distributing network traffic across multiple WAN connections. It is suitable for small to medium-sized businesses or home offices.
What are the key features of the TP-Link TL-R470T+ Load Balance Broadband Router?
The key features of the TP-Link TL-R470T+ include load balancing of multiple WAN connections, support for up to four WAN ports, automatic failover to ensure uninterrupted internet connectivity, built-in firewall protection, IP and MAC-based bandwidth control, and extensive management options.
How does the load balancing feature work on the TP-Link TL-R470T+ router?
The load balancing feature on the TP-Link TL-R470T+ router distributes incoming and outgoing network traffic across multiple WAN connections, optimizing bandwidth usage and ensuring smooth internet connectivity. It intelligently balances the load based on predefined rules and settings.
What types of WAN connections does the TP-Link TL-R470T+ support?
The TP-Link TL-R470T+ supports various types of WAN connections, including dynamic IP, static IP, PPPoE, and PPTP. It allows you to connect multiple ISP connections to the router for load balancing and failover purposes.
Can I prioritize specific types of network traffic with the TP-Link TL-R470T+?
Yes, the TP-Link TL-R470T+ router offers IP and MAC-based bandwidth control, which allows you to prioritize specific types of network traffic or allocate bandwidth based on IP addresses or MAC addresses. This ensures that critical applications or devices receive the necessary bandwidth.
Does the TP-Link TL-R470T+ have a built-in firewall?
Yes, the TP-Link TL-R470T+ comes with a built-in firewall that provides network security by monitoring and controlling incoming and outgoing traffic. It supports features like IP and MAC address filtering, URL filtering, DoS (Denial of Service) defense, and more.
Can I use the TP-Link TL-R470T+ as a VPN (Virtual Private Network) server?
No, the TP-Link TL-R470T+ does not have built-in VPN server functionality. It focuses primarily on load balancing and failover features. If you require VPN capabilities, you may need to consider using a separate VPN server or a router with VPN support.
Does the TP-Link TL-R470T+ support IPv6?
No, the TP-Link TL-R470T+ does not have native IPv6 support. It is designed to work with IPv4 networks. However, it can still be used in conjunction with an IPv6-to-IPv4 conversion mechanism, such as a dual-stack router or a tunneling protocol.
Can I manage and configure the TP-Link TL-R470T+ router remotely?
Yes, the TP-Link TL-R470T+ supports remote management and configuration. You can access the router's web-based management interface from a remote location using a web browser. However, it is important to ensure proper security measures are in place to protect remote access.
Is the TP-Link TL-R470T+ suitable for home use?
While the TP-Link TL-R470T+ can be used in a home environment, it is primarily designed for small to medium-sized businesses that require load balancing and failover capabilities. For typical home use, a regular router may suffice unless you have specific networking requirements.
Does the TP-Link TL-R470T+ support wireless connections?
No, the TP-Link TL-R470T+ is a wired router and does not have built-in wireless capabilities. It is designed to be connected to wired devices or to be used in conjunction with a separate wireless access point or router for wireless connectivity.
Can I connect multiple TP-Link TL-R470T+ routers together for larger networks?
Yes, you can connect multiple TP-Link TL-R470T+ routers together to create a larger network. This can be achieved by connecting the LAN ports of each router to expand the network coverage and load balancing capabilities.
Download This PDF Link:TP-Link TL-R470T+ Load Balance Broadband Router Installation Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>