NITEforce Solar Power Panel User Manual
- June 4, 2024
- NITEforce
Table of Contents
Copyright © 2021 –www.niteforce.mobi
Solar Power Panel
User Manual
Solar Power Panel
PLEASE READ CAREFULLY BEFORE USING THE PANEL
Thank you for Purchasing
NITEforce Solar Power Panel
The NITEforce Solar Power Panel is compatible with all 6V, 9V, or 12V
compatible trail cameras or feeders on the market. It has 6V, 9V, and 12V
Output Power Ports which allows you to connect your device to Solar Power
Panel. 3 Power Connecting cables and 1 USB charging cable are included. Heavy
duty Tree Mount is included.
How does the NITEforce Solar Panel work?
NITEforce Solar Power Panel has a high-quality Solar Cell MonoCrystalline
Silicone panel, which is charging the inbuild 8000mAh Li-Po high-capacity
battery on sunny and cloudy days. Solar Panel has a green LED light indicating
when the charging is ON.
Which power output port should I use?
Power Port Internal smart power converter converts the output power to panel
power ports (6V, 9V, or 12V) giving steady power to your device.
NOTE: Do not connect higher Voltage output ports to lower Voltage
devices:
- Connect 6V output port to 6V compatible device
- Connect 9V output port to 9V compatible device
- Connect 12V output port to 12V compatible device
How to connect Solar Power Panel to camera or feeder?
Use the correct size Power Connecting Cable between the Solar Panel and your
device. You can leave AA batteries inside your camera or feeder while external
power (Solar Power Panel) is connected. It will maximize the operation standby
time for your camera or feeder.
How the Solar Power Panel is charged?
- Charging by sunshine
Place the Solar Power Panel towards the afternoon Sunshine direction when the sunshine has the strongest presence between noon to 3 PM. Mount the Solar Power Panel with Tree Mount (included) tilting to optimal 40° – 45° degrees angle. Check your local best Sunshine presence times before installation.
Make sure that there is no obstacles like leaves, branches, or snow blocking the direct sunshine towards the Solar Power Panel. Solar Power Panel is always charging under the sunshine, no matter if it is connected to a camera or not. It will take around 40 hours to fully charge status. During the charging process, there is no red LED light working.
- Charging with a USB cable to the DC input port
If needed, the Solar Power Panel is able to charge with a USB cable (included). Use the input port (IN 5V) and USB cable for charging. You can use your own mobile phone charger (5V/2A) for charging the Solar Power Panel build the battery.
It will take around 5 hours to fully charge status. During the charging process, there is no red LED light working.
Solar Power Panel inbuild battery status LED indicators:
| Power in solar panel | LED1 | LED2 | LED3 | LED4 |
|---|---|---|---|---|
| 0 <power<25% | ON or OFF | OFF | OFF | OFF |
| 25% <power<50% | ON | ON | OFF | OFF |
| 50% <power<75% | ON | ON | ON | OFF |
| 75% <power<100% | ON | ON | ON | ON |
Push the Black Power Check button and see the status
Technical Product Specifications
| Battery Capacity | 8000mAh (2 x 4000mAh) |
|---|---|
| Battery Class | Class A Li-Polymer |
| Battery Power Status LED | Yes (100% / 75% / 50% / 25%) |
| Output Voltage Ports | 6V (2.4A) / 9V (1.6A) / 12V (1.2A) |
| Input USB Cable Charging Port | 5V (2.0A) |
| Solar Panel Cells Material | Monocrystalline Silicon |
| Estimated Charging Times (Full) | 5 hours by USB 5V Cable |
| 40 hours of continuous sunshine | |
| Lightning (thunder) Protection | Yes |
| Hail Rain Protection | Yes |
| Panel Dimensions | 188mm x 157mm x 36mm |
| Mounting | Tripod Tree Screw Mount (included) |
| Tripod Threads 1/4″-20 | Back & Under |
| Color | Black |
| Weather Proof | IP66 |
| Operation Temperatures | -5°C … +50°C |
| Operation Humidity | 5% – 90% |
IMPORTANT:
Mount the NITEforce Solar Power Panel Always cable ports pointing downwards! This will secure weatherproof conditions:
1 YEAR WARRANTY
This product is warranted to be free from defects in material and workmanship for 1 year from the original date of purchase when purchased through an authorized dealer. NITEforce will, at its option, repair or replace your product with the same or comparable
model, free of charge (shipping charges may apply) for a period of (1) one year from the original date of purchase in the event of a defect in materials or workmanship occurring with normal use. This warranty only extends to the original retail purchaser. A purchase receipt or other proof of date of original purchase is required before warranty performance. The warranty on any replacement product provided under this warranty shall be for the unexpired portion of the warranty period applicable to the original product. This warranty extends solely to failures due to defects in materials or workmanship occurring during normal use. It does not cover the normal wear of the product.
This warranty is void if:
- The unit has been used incorrectly, opened or punctured
- The unit has been immersed in water or other liquids, allowing to be filled with dirt or dust or otherwise physically misused
- The 1 year warranty period has expired
- If the product fails to function properly as a result of an accident, misuse, abuse, neglect, mishandling, misapplication, noncompatible batteries, faulty installation, setup, adjustments, improper maintenance, alteration, maladjustment of controls,
modification, power surges, service by anyone other than NITEforce or NITEforce authorized service center or acts beyond the manufacturer’s control.
PRODUCT REPAIR
Repairs for damages not covered by the warranty will be subject to a charge. Please contact the nearest NITEforce sales agency shop to discuss repair options not covered under warranty.
WARRANTY WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
www.niteforce.mobi
Copyright © 2021 NITEforce International