SOUNDPEATS Wings 2 Wireless Earbuds User Manual

SOUNDPEATS Wings 2 Wireless Earbuds

First Time of Use

Please open the lid of the charging case to take out the headphones, remove the insulating film from the lop of both headphones, then put both headphones back into the charging case.

1. Open the charging case cover, and take out the headphones, the headphones will automatically turn on and enter the mutual pairing state. When the white and red light In the rights earphone flashes alternately, and the white light in the left earphone is always on, the two earphones are successfully paired.
2.  Turn on your devices Bluetooth and select SOUNDPEATS Wings2 from the Bluetooth list lo complete the pairing.

Reset

1. Clear the pairing record from your device.
2. Place back both earbuds into charging case and make sure they are in charging status.
3. Press and hold both buttons for l Os until both LEDs flash in red and white twice, reset complete.

Wearing methods

1. Identify the left and right earphones.
2. Adjust the earphones to fit your ears.

Product Diagram

Control

Power On| Auto: Open the charging case; the earphones turn on automatically

Manually: Press and hold the multifunctional button for 1.5s, with earphones off

---|---
Power off| Auto: Place the earphones back into the charging case and close the case lid

Manually: Press and hold the multifunctional button for l Os, with earphones on

Play/Pause| Double-tap on the multifunctional button
Volume­| Single-tap on the left multifunctional button
Volume+| Single-tap on the right multifunctional button
Next Track| Press and hold the right multifunctional button for 1.5s
Previous Trock| Press and hold the left multifunctional button for 1.5s
Answer/Hang Up a Phare Call| Double-tap on the multifunctional button
Reject a Phare C ci| Press and hold the multifunctional button for 1.5s
Switch Between Two Active Calo| Press and hold the multifunctional button for 2s
Activate/Deactivate the Voice Assistant| Press the right multifunctional button for three times
Activate the Game Mode| Press the left multifunctional button for three times

Q&A

Ql: What does the Indicator light of the charging case display?

1. The batter/ life of the charging case when the earphones are placed back: Sufficient Batter/ of the charging case – The red light stays on for 4S and then goes out. Low Battery of the charging case – The red light fishes for 4s then goes out.
   

2. Charging status of the charging case the charging case Is being charged – the blue light flashes on. the charging case is fully charged – the blue light stays on.

Q2: H- to charge the charging case?

1. Connect the charging case to a Type-C charger. (The current does not exceed 1 A).
2.  If the earphones stay idle for an extended period, charge them at least ever { three months to prevent the battery from being damaged.

Q3: Why are the earphones STIII connected to the phone when they are put back into the charging case and the case lid is closed?

1. Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
2. Ensure the earphones are properly placed In the charging case and the charging metal sheet and PIN are clean. And wiping clean the contact points on the earphones and the charging case should fix this Issue.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>