saxby lighting 81022 Track Suspension Kit Instruction Manual
- June 12, 2024
- saxby lighting
Table of Contents
lighting 81022 Track Suspension Kit
Instruction Manual
Instruction manual
Track Suspension Kit 81022
81022 Track Suspension Kit
Warning
- Note that the power needs to be isolated/switched off at the fuse board.
- IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light titling.
- This product is suitable for indoor use only and not for areas constantly subject to moisture such as bathrooms.
- The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for “masonry” only. Other fixings not supplied and must be purchased.
- Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
- Never put anything on the product or hang anything on any part of this product.
- The total height of the accessories is 300cm and the height can be adjusted.
V2 19/07/2022 UK
Manufacturer: BH17 7BY sabot.
EU Manufacturer: Balint AG,
Brilllantstrasse 1, D-27442 Gnarrenburg
www.saxbylighting.com lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>