snakebyte SB918230 Dual Charge and Headset Stand 5 Instruction Manual

: June 12, 2024
: snakebyte

Table of Contents

PRODUCT INFORMATION
OPERATING INSTRUCTION DUAL CHARGE & HEADSET STAND 5Th
TROUBLE SHOOTING
TECHNICAL SPECIFICATIONS
SAFETY PRECAUTIONS
GENERAL PRECAUTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DUAL CHARGE & HEADSET STAND 5™
Black/White

snakebyte SB918230 Dual Charge and Headset Stand 5 -

Instruction Manual

snakebyte SB918230 Dual Charge and Headset Stand 5 -
fig1

Controller LED charging indicator
Headset LED charging indicator
PS5TM controller connector
Headset socket
USB-A headset charging port
USB-C power input

DUAL CHARGE & HEADSET STAND 5™ for PS5™

PRODUCT INFORMATION

Thank you for choosing snakebyte’s DUAL CHARGE & HEADSET STAND 5™. Please read this guide for important safety and health information and retain it for future reference.

CONTENT
1 x DUAL CHARGE & HEADSET STAND 5™
1 x Charging cable 15 cm USB-A to USB-C
1 x Charging cable 15 cm USB-A to Micro USB
1 x Charging cable 100 cm USB-A to USB-C

OPERATING INSTRUCTION DUAL CHARGE & HEADSET STAND 5Th

– Plug the power supply into the charger, the orange and blue lights will be on for 1 second for self-checking, and then turn off after self-checking. If there is overvoltage or low voltage in the input power supply, the oronge LEO light flashes quickly to give on olorm, and the input power supply needs to be disconnected and check the power supply. Then reconnect to restore the charger function.
– Put the controller into the charger socket, if the controller needs to be charged, the orange LEO light will be on, indicoting thot it is chorging; if the controller is fully chorged, the orange LED light will be off, and the blue LED light will be on, indicoting that the charging is fully chorged.
– Use the charging cable to connect the headset. If the heodset needs to be charged, the orange LED light is on, indicating that it is charging: if the headset is fully charged, the oronge LED light is off, and the blue LED light is on, indicoting that the chorging is fully charged. (If the power status of the connected headset is fully chorged, the orange light will be off and the blue light will be on after the charger chorges it for 15 seconds approximately.)
– Input overvoltage and undervoltage protection function, if the input power supply voltage is greater than 5.7V, the orange LEO fast light flashes, overvoltage olorm, the charger will stop charging immediately; if the input power supply voltage is less than 4.2V, the orange LED fast light flashes, Undervoltage alarm, the charger will stop charging immediately. After overvoltage and undervoltage protection, it is necessary to disconnect and check the power supply. Then reconnect to restore the charger function.
– Output overvoltage protection function, if the voltage of the charging output terminal is greater than 5.7V, the orange LEO flashes quickly to alarm, the charger will stop charging immediately, and the input power needs to be disconnected and check the power supply. Then reconnect to restore the charger function.
– The maximum allowable load current of the charging port of the handle is 1500MA. If the load exceeds 1500MA, the orange LED light flashes rapidly, and the charging port is over-current protected, and there will be no voltage output. It is necessary to disconnect and check the power supply. Then reconnect to restore the charger function.
– The maximum allowable load current of the charging port of the headset chorging is 800MA. If the load exceeds 800MA, the orange LED light flashes rapidly, and the charging port is over-current protected, and there will be no voltage output. It is necessary to disconnect and check the power supply. Then reconnect to restore the charger function.
– If the headphone is left connected to the charger for a longer period after its butteries are fully charged, the charging status indicator light may switch off.

TROUBLE SHOOTING

THE CONTROLLER IS NOT CHARGING:
– Make sure the DUAL CHARGE & HEADSET STAND 5′” controller is firmly placed on the charging plug.
– Make sure DUAL CHARGE & HEADSET STAND 5′” is connected to USE power supply.
– Make sure the connected USB power supply is plugged in.
THE HEADSET IS NOT CHARGING:
– Make sure the headset is firmly connected to the charging cable.
– Make sure DUAL CHARGE & HEADSET STAND 5′” is connected to USE power supply.
– Make sure the connected USB power supply is plugged in.

TECHNICAL SPECIFICATIONS

– model number: SB918230 / 918636
– Input Power: 5VOC 2A – Output Power (Controller): 5.2VDC 0.75A
– Output Power (Headset): 5.2VOC 0.65A
– Operating temperature: 0 ‘C to +50 ‘C

SAFETY PRECAUTIONS

– Protect the power supply and USB charging cable from dust, moisture, fluids, high temperature, directsunlight, microwaves and shocks.
– Treat this product carefully. Incorrect usage may cause fire and burns,
– Oo not touch the connectors of the product and USE charging cable with fingers, or metallic objects.
– Oo not use the product or USB charging cable after they came in contact with fluids.
– Oo not use the product or USB charging cable when they are damaged.
– Immediately unplug and stop using the product, if it or the USE charging cable emits strange noises, smellsor smoke.
– Oo not open the product and do not try to repair it.

GENERAL PRECAUTIONS

– Keep device out of reach of small children.
– D o not expose the product to extremely hot, or cold temperatures, high humidity or direct sunlight.
– Do not use the product close to any heat sources.
– Do not subject the product to any liquids and never use it when the product is wet.
– Do not put heavy objects on the product.
– Do not throw or drop the product.
– Do not attempt to take apart, open, service or modify the product. Doing so could present the risk ofelectronic shock, damage, fire, or other hazard.
CLEANING
– Clean only with a soft, dry cloth. Avoid cleaning solutions, solvents or other chemicals and do not attempt to clean connectors as this may damage the product.
COPYRIGHT INFORMATION©2022 All rights reserved. This document may not in whole or in part be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, or reduced to any electronic medium or machine-readable form without prior consent, in writing, from snokebyte distribution GmbH. snokebyte is o registered trademark of snakebyte distribution GmbH. Sony is a registered trademark of Sony Computer Entertainment. PlayStation° and PS5′” are registered trademarks of Sony. This product is not designed, manufactured, approved, sponsored, or endorsed by Sony. snokebyte is a registered trademark of snakebyte distribution GmbH. All trademarks are the properties of their respective owners.
EU / UK DECLARATION OF CONFORITY

Hereby we guarantee that snakebyte distribution GmbH / snakebyte UK Ltd are marketing this device (DUAL CHARGE & HEADSET STAND 5™) under the brand name DUAL CHARGE & HEADSET STAND 5™ and complies with the legal requirements of EU and UK conformity.
https://snakebyte.com

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio TV technician for help.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

SB918230 / SB918636 / Version: 09/2022 / Made in China

WEEE (Waste Electrical and Electronic Equipment Directive) If you eventually want to dispose of this product at a later time, please observe the following instructions: Electronic equipment should not be disposed of together with household waste. Please recycle the device if the appropriate recycling ways are available to you. Please contact your local authority or retailer and ask them for advice on recycling.