snakebyte SB914119 Headset Archives Instruction Manual

: June 9, 2024
: snakebyte

Table of Contents

PRODUCT INFORMATION
CONTENT
OPERATING INSTRUCTION HEAD:SET PRO'” SB914119
TECHNICAL SPECIFICATIONS
SECURITY ADVICES
TROUBLESHOOTING
SAFETY PRECAUTIONS
CLEANING
EU DECLARATION OF CONFORITY
CUSTOMER SUPPORT/ TECHNICAL SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

snakebyte SB914119 Headset Archives

PRODUCT INFORMATION

Thank: you for choosing snakebyte’s HEAD:SET PRO™. Please read this guide for important safety and health information and retain it for future reference.

CONTENT

lx HEAD:SET PRO™
lx Manual

OPERATING INSTRUCTION HEAD:SET PRO'” SB914119

Connect the USB headphone plug with the USB plug of the PC.
Set the sound volume of the audio device to a comfortable level.
In-line controls and a LED lit microphone that activates when muted allows you to manage settings and turn on/off microphone and bass booster.

TECHNICAL SPECIFICATIONS

Model number:	SB914119

SECURITY ADVICES

Set the sound volume of the audio device to the lowest level, before connecting a headphone.
Continuous, long-term exposure to loud music, or noises, can cause hearing damages.

TROUBLESHOOTING

No sound via the headphone:

Make sure the headphone is properly connected with the audio device.
Make sure the audio volume is not completely turned down.

SAFETY PRECAUTIONS

Protect the device from dust, moisture, fluids and shocks.
Do not open, or try to repair the device.
Do not pull on the cable.
Do not use the device when it is damaged.
Only clean with a soft, clean cloth.

CLEANING

Clean only with a soft, dry cloth. Do not use cleaning agents.

COPYRIGHT INFORMATION
©2018. All rights reserved. This document may not in whole or in part be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, or reduced to any electronic medium or machine-readable form without prior consent, in writing, from snakebyte distribution GmbH.

WEEE (Waste Electrical and Electronic Equipment Directive) If you eventually want to dispose of this product at a later time, please observe the following instructions: Electronic equipment should not be disposed of together with household waste.
Please recycle the device if the appropriate recycling ways are available to you. Please contact your local authority or retailer and ask them for advice on recycling.

This product has been certified as RoHS compliant in accordance with Directive 2014/53/EU.

Disposal of batteries/rechargeable batteries
Please follow regional guidelines for the disposal of rechargeable batteries or contact local authorities, your household waste disposal service or the shop where you purchased the product. Batteries/rechargeable batteries must not be disposed of into the normal household garbage. Please use a rechargeable battery disposal in your neighborhood or community, if available.

EU DECLARATION OF CONFORITY

Hereby we guarantee that snakebyte distribution GmbH, located at 13 IConrad- Zuse-Str., Schwerte 58239 Germany, is marketing this device {HEAD:SET PRO™) under the brand nome HEAD:SET PRO™ and complies with the legal requirements and the requirements of Directive 2014/53/EU. This notification is listed under: http://mysnokebyte.com/moin-menu/support/downloods.html

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant ta Part 15 of the FCC Rules. These limits are designed in a residential installaion. This equipment generates, uses, and con radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into on outlet on o circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.