ZALMAN R2 ATX Mid Tower Case User Manual
- June 4, 2024
- ZALMAN
Table of Contents
- ZALMAN R2 ATX Mid Tower Case
- Specifications
- Accessories
- 1/0 Ports
- Removing the side panels
- Removing the front panel
- Mounting the motherboard
- Mounting the PCI-E(VGA) card
- Mounting the 2.5″ SSD
- Mounting the 3.5″ HDD
- Mounting the PSU
- Mounting the radiator
- Mounting the fans
- Fan(s) Included/ Fan Specifications
- How to connect the LED Switch & multiple fans
- 1/0 Connectors
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZALMAN R2 ATX Mid Tower Case
Precautions
- Read this manual carefully before installing.
- Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
- Wear gloves to prevent accidents when installing the product.
- Severe damage may occur when mounting the system, so do not apply excessive force.
- Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
- Be careful not to block the ventilation hole of the product when using the system.
- Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
- Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
- Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
- Store and use the product out of children’s reach.
- Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
Specifications
| Model | R2 |
|---|---|
| Case Form Factor | ATX Mid-Tower |
| Dimensions | 420 x 207 x 457(H)mm |
| Weight | 5.4kg |
| Case Materials | Plastic, Steel, Tempered Glass |
| Motherboard Support | E-ATX(~280mm) / ATX / mATX / Mini-lTX |
| Maximum VGA Length | 350mm |
| Maximum CPU Cooler Height | 162mm |
| Maximum PSU Length | 190mm |
| PCI Expansion Slots | 7 |
| Drive Bays | 2 X 3.5″, 2 X 2.5″ |
| Fan Support | Top |
| Front | 3 x 120mm / 3 x 140mm |
| Rear | 1 x 120mm |
| Fan(s) Included | Rear |
| Radiator Support | Front |
| Rear | 240mm |
120mm
1/0 Ports| 1 x Headphone, 1 x Mic, 2 x USB 2.0,
1 x USB 3.0, Power Button, Reset Button , LED Button
Accessories
1/0 Ports
Removing the side panels
- Tempered Glass
- Steel Panel
Removing the front panel
Mounting the motherboard
Motherboard size
- E-At
- ATX
- mATX
- Mini-lTX
Mounting the PCI-E(VGA) card
Mounting the 2.5″ SSD
Mounting the 3.5″ HDD
Mounting the PSU
Mounting the radiator
-
Mounting the front radiator
· 240mm -
Mounting the rear radiator
· 120mm
Mounting the fans
- Mounting the top fans
- 2x120mm
- Mounting the front fans
- 3x 120mm
- Mounting the rear fan
- 1 x 120mm
Fan(s) Included/ Fan Specifications
How to connect the LED Switch & multiple fans
1/0 Connectors
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>