PROAIM P-CTST-01 Cam Tower Stand with Counterbalance User Manual
- October 30, 2023
- PROAIM
Table of Contents
**PROAIM P-CTST-01 Cam Tower Stand with Counterbalance User Manual
**
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below
-
Accessory Tray
-
Cam Tower Stand w/ Counterbalance
-
Platform Section-2 with Locking Pivot Wheels
-
Camera Support Platform
-
Platform Section -1 with Locking Pivot Wheel
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or byany means, electronic, mechanical, photo-copying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
-
2 x Screws
-
1x Spanner (Size:-17mm)
-
2x Allen Key T-Type (Size:-3/16”,4mm)
Proaim Cam Tower Stand w/ Counterbalance Setup
Platform Section -1 with Locking Pivot Wheel
-
Loosen all the screws of the platform section-1, as shown in image.
-
Now all the screws have been removed.
Platform Section-2 with Locking Pivot Wheels
-
Now attach the platform section-2 with the platform selection-1.
-
Assemble the platforms together using the screws and secure them with the spanner.
-
Now make it stand upright on its wheels
Cam Tower Stand w/ Counter balance
-
Now mount the tower stand on the platform rod.
-
Secure the tower stand with the help of provided Allen key
Camera Support Platform
-
Attach the support platform to the counter balance column of the Cam tower stand
-
Screw it with the help of the Allen key.
-
Remove the screws from the bottom of the counterbalance column.
Accessory Tray
-
Now place the accessory tray with the counter balance column, as shown in the image.
-
Add screws to the accessory tray and secure it with the Allen key.
-
The tray is now properly attached.
Camera Support Platform
-
Now open the crank lever of the support platform.
-
Rotate the crank of the support platform rod.
-
Attach your camera (Not Included) to support platform and secure it by the rotating knob.
-
Open the knob of the counterbalance to adjust the height of the support platform and secure it by closing the knob back again.
YOUR PROAIM CAM TOWER STAND W/ COUNTERBALANCE ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty
We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>