HOME DECORATORS COLLECTION RS20201020-3 Sarolta Sands 6 Light Island Pendant Light Owner’s Manual
- October 30, 2023
- HOME DECORATORS COLLECTION
Table of Contents
Item # 1007873112 / 1007871295 / 1007871290
Model # RS20201020-3 / RS20201020-3 BZ / RS20201020-3 ASL
USE AND CARE GUIDE
SAROLTA SANDS 6 LIGHT PENDANT
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators
Collection through the purchase of this light fixture. We strive to
continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement
needs. Thank you for choosing Home Decorators Collection!
Safety Information
- Consult a qualified electrician if you have any electrical questions.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation. Please call our Customer Service Team at
1-800-986-3460.
WARNING: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker or
by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to
be defective, the manufacturer’s only obligation, and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit
www.homedepot.com/homedecorators.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| cc | Wire nut | 3 |
| DD | Wall anchor | 2 |
| EE | Anchor screw | 2 |
| FF | Screw (pre-assembled with light fixture) | 4 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Canopy | 1 |
| C | Link (w/ quick connector) | 2 |
| D | Long rod 1 | 2 |
| E | Long rod 2 | 2 |
| F | Short rod | 4 |
Installation
1 Assembling the light fixture
- Screw the long rods 1, 2 (D,E) to the top of the light fixture (A). Then screw in the remaining short rods (F) and attach the links (C). Weave the electrical wires, ground wires through the chain and make sure to feed the branch wires through the rods during assembly. Remove the sleeve on the branch wires after weaving them through the assembly.
- Attach the canopy (B) to the link (C) opening the quick connector by loosening the nut. Ensure the quick connector is fully closed before moving on to the next step.
NOTE: To easily thread the wires through the chain and the rods, leave
the sleeve on the branch wires until after assembly.
NOTE: Before assembling the rods with the branch wire, choose the number
of tubes to adjust the height.
2. Attaching the mounting unit to the junction box
-
Remove pre-installed screws (FF) from the canopy (B).
Due to the weight of the fixture, a wire is secured to the canopy (B) and the mounting unit (AA). -
Drill pilot holes for wall anchors (DD). Insert anchors (DD) flush into the wall.
-
Attach mounting unit (AA) to the junction box (not included) with mounting screws (BB).
-
Insert anchor screws (EE) into anchors (DD)
3 Making the electrical connections
- Connect the copper wire on the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
- Connect the black to black wire (power), the white to white wire (neutral), and the copper wire to the ground wire with wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
4 Securing the light fixture
- Secure the light fixture (A) to the junction box by placing the canopy (B) on the mounting unit (AA) and securing it with the screws (FF).
5 Installing the light bulbs
- Install six E12 candelabra 60-watt bulbs (not included).
Operation
1. Turning the light on
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is On. | |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the On position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
Contact a qualified electrician or call the Customer Service Team at
1-800-986-3460.
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. -7 p.m., EST, Monday – Friday, 9 a.m. — 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
References
- Home Decorators Collection - Home Decor - The Home Depot
- Home Decorators Collection - Home Decor - The Home Depot
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>