PROAIM P-MTCL-STD-BLK Mitchell Heavy-Duty Camera Tripod Stand with Spreader User Manual
- October 30, 2023
- PROAIM
Table of Contents
PROAIM P-MTCL-STD-BLK Mitchell Heavy-Duty Camera Tripod Stand with Spreader
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Mitchell Heavy-Duty Camera Tripod Stand with Spreader
-
Bag Packing
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Mitchell Tripod Stand with Spreader Setup
-
Take out the Spreader and spread it on floor and open the legs (as per your requirement) of spreader with the help of provided knob.
-
Now mount the Mitchell Tripod Stand on Spreader, lock it in place with the rubber grips
-
Then, spread the Mid-Level Spreader of the tripod according to your requirements. Similarly, use all three adjustment bottom knobs after spread the legs of stand make sure all knobs tighten properly to secure your setups.
-
Position the height of the Mitchell tripod Stand by loosening all three adjustment knobs, sliding the tripod up to the desired height and re-tighten the knobs securely.
-
Remove the fluid head (Not Included) by loosening the Castle ring and then mount it on top of a Mitchell Tripod Stand.
-
After mounting the fluid head (Not Included) on the Mitchell Tripod Stand, tighten the Castle ring from the bottom as shown in the image.
-
Remove the Fluid head top plate (Not Included), by pushing the Push pin of the fluid head then attach the plate to the bottom, matching the camera’s threads.
-
After attaching the Fluid head plate (Not Included), tighten it properly using a screwdriver. Then mount the camera (Not Included) onto the fluid head by sliding.
-
Secure the Camera with the help of the locking knob of the fluid head.
-
Now setup is ready to use.
YOUR PROAIM MITCHELL HEAVY-DUTY CAMERA TRIPOD STAND WITH SPREADER ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.