DEWALT DXBC15002 Ratchet Strap Instruction Manual
- October 30, 2023
- Dewalt
Table of Contents
DEWALT DXBC15002 Ratchet Strap
Product Information
DXBC15002 / DXBC15004 Ratchet Strap
The DXBC15002 / DXBC15004 Ratchet Strap is a tool used for securing cargo loads during transportation. It is designed to prevent the cargo from moving or shifting during transit, ensuring the safety of the cargo and the people involved in the transportation process. The strap is made of high-quality webbing material that is durable and resistant to wear and tear. It has a ratchet mechanism that allows for easy tightening and loosening of the strap.
Product Usage Instructions
Before using the DXBC15002 / DXBC15004 Ratchet Strap, it is important to read all warnings carefully and comply with them to avoid damage to the product, personal property, and personal injury. It is crucial not to exceed the working load limit of the strap, which takes into account the strap, the load, the vehicle anchor points, strap configuration, and angle, etc.
To Tighten:
- With the ratchet closed, thread the strap through the slot in the center of the ratchet drum.
- Pull the webbing through, removing any slack.
- To tighten, raise and lower the ratchet handle. Do not overtighten. Make sure to have a minimum of 2 full wraps of webbing around the drum.
- Keep the ratchet in a closed position to lock.
To Release:
- Pull up on the release bar and hold.
- With the release pulled up, push forward until the ratchet is completely flat and open.
- Grab the webbing and pull away from the ratchet head to release.
For more information and product details, visit www.DEWALTSTRAPS.com.
OPERATING INSTRUCTIONS
DXBC15002 / DXBC15004 RATCHET STRAP
READ ALL WARNINGS CAREFULLY AND COMPLY WITH ALL WARNINGS.
FAILURE TO DO SO MAY RESULT IN DAMAGE TO THIS PRODUCT, PERSONAL PROPERTY
AND/OR PERSONAL INJURY.
*DO NOT EXCEED THE WORKING LOAD LIMIT OF THE STRAP; TAKING INTO ACCOUNT THE STRAP, THE LOAD, THE VEHICLE ANCHOR POINTS, STRAP CONFIGURATION AND ANGLE, ETC.
TO TIGHTEN
- WITH RATCHET CLOSED, THREAD STRAP THROUGH THE SLOT IN THE CENTER OF THE RATCHET DRUM.
- PULL WEBBING THROUGH, REMOVING THE SLACK.
- TO TIGHTEN, RAISE AND LOWER RATCHET HANDLE; DO NOT OVERTIGHTEN. (MAKE SURE TO HAVE A MINIMUM OF 2 FULL WRAPS OF WEBBING AROUND THE DRUM.)
- KEEP RATCHET IN CLOSED POSITION TO LOCK.
TO RELEASE
- PULL UP ON THE RELEASE BAR AND HOLD.
- WITH THE RELEASE PULLED UP, PUSH FORWARD UNTIL THE RATCHET IS COMPLETELY FLAT AND OPEN.
- GRAB WEBBING AND PULL AWAY FROM THE RACTCHET HEAD TO RELEASE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>