Bodet Style II 7 Date LED Digital Clock Installation Guide
- October 30, 2023
- Bodet
Table of Contents
Style II 7 Date LED Digital Clock
Product Information
The Style II 7 and Style II 10S are time display units that come with different styles and dimensions. The dimensions of the units are as follows:
- A: 61mm
- B: 140mm (Style II 7), 114mm (Style II 10S)
- C: 80mm (Style II 7), 93mm (Style II 10S)
- D: 320mm (Style II 7), 517mm (Style II 10S)
- E: 137mm (Style II 7), 375mm (Style II 10S)
- F: 68.5mm (Style II 7), 187.5mm (Style II 10S)
The units support various time protocols such as DHF/IND/RADIO,
AFNOR/IMPULSION/IMPULSES/MINUTENIMPULS/IMPULSOS, and NTP. The units are
available in different colors such as Blue, Brown, and Brown/Braun/Marron.
The units come with an RJ45 connector already crimped on an Ethernet cable with a length of approximately 1m 80. In case of passing the cable through a watertight box, the Ethernet cable needs to be cut, and a new RJ45 plug needs to be crimped into the box.
For more technical documentation, visit www.bodet-time.com.
Product Usage
- Choose the appropriate Style II unit based on the required dimensions and color.
- Connect the unit to a power source.
- Connect the unit to a time source using one of the supported protocols (DHF/IND/RADIO, AFNOR/IMPULSION/IMPULSES/MINUTENIMPULS/IMPULSOS, or NTP).
- If passing the cable through a watertight box, cut the Ethernet cable and crimp a new RJ45 plug into the box.
- Mount the unit on the desired location.
- Refer to the technical documentation available on www.bodet-time.com for more information on configuring and using the unit.
INSTALLATION MECHANICAL INSTALLATION – MECHANISCHE MONTAGE
WALL MOUNTING & DIMENSIONS
Dimensions (mm)
| A| B| C| D| E| F
---|---|---|---|---|---|---
STYLE II 7| 320| 137| 68,5| 61| 140| 80
STYLE II 7 DATE| 114| 320| 93
STYLE II 10| 517| 375| 187,5| 84| 209| 91,5
STYLE II 10S| 653| 90
INSTALLATION
DHF / IND / RADIO
AFNOR / IMPULSION – IMPULSES – MINUTENIMPULS – IMPULSOS
2.3 – NTP
In case of a passage through a watertight box, cut the ethernet cable, pass the cable through the cable gland and crimp a new RJ45 plug into the box.
TIME SETTING
IMPULSIONNELLES
To set the time refer to the menu below.
Refer to the complete manual to set the time of an impulse synchronized clock
network.
AFNOR/IRIG-B CODED TIME RECEIVER
When connected to the AFNOR network, the clock displays the time
broadcasted by the master clock.
RADIO RECEIVER CLOCKS
Automatic time setting by radio signal (after about 3 to 5 minutes).
DHF DHF :
set the master clock in INIT mode (refer to the master clock user manual).
HORLOGES NTP
Download the «Bodet Detect» software for setting up the clock.
Get the download link in the full product manual available at: www.bodet-
time.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>