CRYSTORAMA ZUC-A9030-EB-GA_CEILING Zucca Four Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA ZUC-A9030-EB-GA_CEILING Zucca Four Light Ceiling Mount
Product Information
The Crystffirama Lighting model #ZUC-A9030-EB-GA_CEILING is a dry-rated fixture suitable for hanging or mounting on the ceiling. The fixture loop, canopy, and chain are made of high-quality materials that ensure durability and longevity. The fixture requires 4 candelabra bulbs with a maximum rating of 60 watts each. LED bulbs are recommended for extended use. The fixture is designed for indoor use only and must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
Product Usage Instructions
For Hanging:
- Screw the fixture loop onto the frame.
- Mount the canopy of the fixture to the ceiling following instructions Drawing 2.
- Install the bulb (not included) into the socket.
For Ceiling:
- Remove the fixture loop, knurled nut, check ring, and hex nut from the top of the frame in that order.
- Remove the loop from the canopy and raise the light cluster up. Place the canopy over the top of the light cluster, then secure it with the hex nut.
- Mount the canopy of the fixture to the ceiling following instruction Drawing 2.
It is important to turn off power before installing this fixture. The product can expose you to lead which is known to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING
- Electrical Danger
- Turn Power off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 4-Candelabra
- 40 Watts Recommended 60 Watts Max.
- USE LED BULBS FOR EXTENDED USE
- THIS FIXTURE IS DRY RATED
Installation Instructions
How to install for hanging
- Screw the Fixture Loop onto the Frame.
- The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2.
- Install the Bulb(not included) into the Socket.
How to install for Ceiling
- Remove the fixture loop, knurled nut, check ring and hex nut, in that order, from the top of frame.
- Remove the Loop from the canopy and raise the light cluster up. Place the canopy over the top of the light cluster, then secure it with the hex nut.
- The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2.
Part Number
- A. (!)-Mounting hardware
- B. (1)-Canopy WS”x H3/4″(XFW9030EBGACANSIN)
- C. (3)-Canopy Screw
- D. (2)-Link
- E. (1)-Chain W4.2mm (XFW9030EBGACHA4.2MM)
- F. (1)-Loop
- G. (1)-Knurled nut
- H. (1)-Check ring
- I. (1)-Hex nut
- J. (1)-Frame
- K. (1)-Fixture loop
- L. (1)- Finial (XFW9030EBGAFIN)
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>