IMOU IPC-A4X-H Consumer Camera User Guide

IMOU IPC-A4X-H Consumer Camera

IN THE BOX

CONNECTION

DOWNLOAD

PAIRING

INSTALLATION

Power On the Camera

Connect the camera to power. You can choose wireless or wired network connection

Get the lmou Life App

Scan the QR code on part 2 or search for “lmou Life” to download and install the app. Create an account and log in.

Set Up the Camera

Scan the QR code on the body of the device or on the cover of this guide with the app, and then follow on-screen instructions to complete the setup

Install the Camera

Make sure the mounting surface is strong enough to hold three times the weight of the camera. For detailed installation process, please see  part 4.

LED Status / Device Status

• Off: Power off
• Solid red: LED turned off
• Flashing red: Booting
• Flashing green: Device malfunction
• Solid green: Network disconnected
• Flashing green and red: Failed to set up the device Ready to set up the device Working properly Updating firmware

In case you need to reset the camera, press and hold the reset button for 10 s until the LED turns solid red.

Legal and Regulatory Information

This product can be regulated by laws that vary from country to country. Check the laws in your local region before using it.

Disclaimer

Every care has been taken in the preparation of this document. Please contact us through the following contact information of any inaccuracies or omissions. Imou shall not be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Imou makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Imou shall not be liable or responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual Property Rights

Imou retains all intellectual property rights relating to technology embodied in the product described in this document.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark Acknowledgments

is the registered trademark or trademark application of Imou in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies.

Regulatory Information

This product complies with the applicable CE marking directives and standards:

• Low Voltage (LVD) Directive 2014/35/EU.
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863.

A copy of the original declaration of conformity may be obtained from Imou. The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: https://en.imoulife.com/support/downloadCenter/eudoc. CE-Electromagnetic Compatibility (EMC) This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment – Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information Technology Equipment.
Declaration of Conformity CE
(Only for the product has RF function) Hereby, Imou declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://en.imoulife.com/support/downloadCenter/eudoc.

Important Safeguards and Warnings

This Chapter describes the contents covering proper handling of the device, hazard prevention, and prevention of property damage. Read these contents carefully before using the device, comply with them when using, and keep it well for future reference.

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

DANGER

| Indicates a high potential hazard which, if not avoided, will result in death or serious injury.

WARNING

| Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.

CAUTION

| Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable result.

TIPS

| Provides methods to help you solve a problem or save you time.

NOTE

| Provides additional supplement to the text.| information| as| the| emphasis| and

Safety Requirement

• Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device.
• Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of device for specific working temperature and humidity.
• Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting condtions.
•  Do not install the device in a place near the heat source, such as radiator, heater, furnace, or other heat generating device to avoid fire.
•  Prevent liquid from flowing into the device to avoid damge to internal components.
•  Install the device horizontally or install on the stable place to pre vent it from falling.
• Install the device in a well-ventilated place, and do not block the ventilation of the device.
• Do not disassemble the device arbitrarily.
• Avoid heavy stress, violent vibration, and soaking during during transportation, storage, and installation. Complete package is necessary during the transportation.
•  Use the factory package or the equivalent for transportation.

Battery

Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. For more information about the server report, see the product´s setup pages or contact Imou support.

WARNING

•  Risk of explosion if the battery is incorrectly replaced.
•  Replace only with an identical battery or a battery which is recommended by Imou.
•  Dispose of used batteries according to local regulations or the battery manufacturer’s instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>