HOME DECORATORS COLLECTION 1007516309 7.5 Foot Elegant Grand Fir LED Pre-Lit Tree with Timer User Manual

HOME DECORATORS COLLECTION 1007516309 7.5 Foot Elegant Grand Fir LED Pre-

Lit Tree with Timer

Product Information

The 7.5 ft Elegant Grand Fir LED Pre-Lit Tree with Timer (SKU# 1007516309) is an artificial Christmas tree that comes with built-in LED lights. The tree has three sections (top, middle, and bottom) that need to be assembled using the included stand and eye bolt. The tree also comes with a power cord, remote control, and two rivets. The LED lights are non-replaceable, and the tree can only be used with the original adapter.

Safety Information
When using electrical products, basic precautions should always be followed including reading and following all safety instructions. The product should be disconnected from its power source before assembling or disassembling. Do not attempt to replace lamps or modify the string of lights to reduce the risk of fire or electric shock.

Product Usage Instructions

Pre-Assembly
Before assembling the tree, make sure you have all the necessary components. The package includes a top section, middle section, bottom section, stand with an eye bolt, power cord, remote control, and two rivets.

Assembly

To assemble the tree stand:

1. Choose a location near a wall outlet.
2. Open the stand to a 90-degree angle until the hole lines up with the hole on the tube.
3. Screw an eye bolt into the hole.

To assemble the tree:

1. Remove protective covers from the base of each tree section before assembling.
2. Insert the tree bottom (C) into the tree stand and tighten the screw.
3. Insert the middle section (B) into the tree bottom (C).
4. Insert the tree top (A) into the middle section (B).
5. Allow branches to fall into place or gently pull branches up and out.

Operation
To turn on the tree, connect each tree section well and plug the power cord into a wall outlet.

Timer Function
The tree comes with a timer function that can be activated using the remote control or control box. To turn off the timer function, press the button on the control box or press the off button on the remote control. The timer has a memory mode, so it will resume the last setting even if the tree is unplugged and re-plugged back on.

Remote Control
The remote control is used to turn on/off the lights or timer function and select different timer hours. To use the remote control, pull out the insulation tape from the remote control before starting to use it. If the remote control does not work, check whether the battery of the remote control is out of power. To replace the remote control battery, replace it with a new button cell CR2025 (3 volt) into the compartment. Do not dispose of batteries in fire as they may explode or leak.

Control Box
The control box is used to turn on/off the lights or timer function and activate the timer mode. To activate timer mode, press and hold the button on the control box. The first indicator lights of timer on the control box turn on for a 2-hours ON, 22-hours OFF cycle. The second indicator lights of timer on the control box turn on for a 4-hours ON, 20-hours OFF cycle. The third indicator lights of timer on the control box turn on for a 6-hours ON, 18-hours OFF cycle. The fourth indicator lights of timer on the control box turn on for an 8-hours ON, 16-hours OFF cycle.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:

• READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• This product is for indoor use only. The electrical rating 0.57 A 120 V 60 Hz.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product – not a toy! To avoid risk of fire, burns personal injury and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• Do not move the tree by pulling the tree tips or tree branches.
• Read and follow all instructions that are on the product or provided with the product.
• SAVE THESE INSTRUCTIONS.

CAUTION! – ALWAYS UNPLUG YOUR TREE
FROM ITS POWER SOURCE BEFORE ASSEMBLING OR DISASSEMBLING.

CAUTION:

1. The product consists of non-replaceable LED lamps. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string.
2. This product can only be used with the original adapter, not other brands of adapter.

Pre-Assembly

Package Contents

Product Assembly

Assembling the tree stand

• Step 1. Choose a location near a wall outlet.
• Step 2. Open the stand to a 90 degree angle until the hole lines up with the hole on the tube.
• Step 3. Screw an eye bolt into the hole.

Assembling the tree
Please remove protective covers from the base of the pole for each tree section before assembling.

• Step 1. Insert tree bottom (C) into the tree stand and tighten the screw.
  (See Fig. 1)

• Step 2. Insert middle section (B) into the tree bottom (C). (See Fig. 2)

• Step 3. Insert tree top (A) into the middle section (B). (See Fig. 3)

• Step 4. Allow branches to fall into place or gently pull branches up and out.
  When adjusting branches be sure that all wires are free of branch hinges. (See Fig. 4)

• Step 5. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at the center of the main stem. Repeat pattern for each branch. (See Fig. 5)

• Step 6. Plug the power cord into a proper outlet. This tree comes with a control box and a remote control. You can change the lighting patterns of the tree by using control box or remote control. Please see Instructions of control box and remote control as below. 

Operation

Turning on the tree

• Step 1. Connect each tree section well and plug the power cord into a wall outlet.

Instruction of control box and remote control
Instruction of control box

1. Press the button on control box to turn on and off the lights or timer function.

2. Press and hold the button on control box to activate timer mode, select below timer hours:

3. The first indicator lights of timer on control box turn on:
   The tree lights will automatically run through a 2-hours ON, 22-hours OFF cycle.

4. The second indicator lights of timer on control box turn on: The tree lights will automatically run through a 4-hours ON, 20-hours OFF cycle.

5. The third indicator lights of timer on control box turn on:
   The tree lights will automatically run through a 6-hours ON, 18-hours OFF cycle.

6. The fourth indicator lights of timer on control box turn on:
   The tree lights will automatically run through an 8-hours ON, 16-hours OFF cycle.

To turn off the timer function, press the button on control box or press the off button on remote control.
There is memory mode on timer control even unplug and re-plug back on.

Instruction of remote control
Please note this tree has a remote control.
Please pull out the insulation tape from the remote control, before starting to use it.

1. Press the button ON or OFF to turn on or off the lights or timer function.
2. Press the 2H, 4H, 6H or 8H button to select the different timer hours.

If the remote control does not work, check whether the battery of the remote control is out of power.

To replace the remote control battery:

1. 1. Replace with a new button cell “CR2025” (3 volt) into the compartment.

CAUTION: DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

Use and Care Instructions

• Before using or reusing, inspect product carefully. Discard any products that have cut , damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.

Care and Cleaning

• Step 1. Remove all ornaments and decorations.
• Step 2. Unplug the power cord from the wall outlet.
• Step 3. Gently lift the tree top straight up to remove from the center section  and fold all branches towards the pole.
• Step 4. Repeat this step for the center and bottom tree sections.
• Step 5. Carefully place all tree sections into a shipping box and tape it shut. Step 6. Store your tree in a cool, dry place away from sunlight.

Troubleshooting

connected into each other well by pressing each section down and rotating. Make sure the power cord is well connected to the tree bottom (C).
If you are still experiencing problems with the tree please call 1-800-986-3460 for instructions.
Top section does not light| Push downward and rotate the top section to B section to make sure they are connected securely.

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

• To reduce the risk of electric shock, use only with the power-supply cord provided or with a cord set intended for indoor use.
• Do not use a cracked, frayed, or damaged cord. Inspect the cord periodically.
• Do not abuse cord – Do not carry product by the cord or yank or pull it to disconnect from the outlet.
• Disconnect the product from the outlet when not in use.

Loose branches
If a branch of the tree falls off, follow the steps below to reinstall it with a spare rivet (G).

Place the branch into the slot of the bracket. Insert a spare rivet through the hole and use diagonal pliers (not included) to crimp the rivet. (See Fig. A)

WARRANTY

3-year Limited Warranty
This product carries a three (3) year warranty against defects in workmanship and materials. This product is not guaranteed against wear or breakage due to misuse and/or abuse.

Date Code: 04012022_2003186

Importer: The Home Depot
Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339 Tel: 1-800-986-3460
Adapter Model No. TS-24WLF12V

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>