CRYSTORAMA 5024-AW-CL-SAQ Pendant Light User Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5024-AW-CL-SAQ Pendant Light
Product Information
The model number of the product is #5024-AW-CL-SAQ. The product is manufactured by Crystorama and is damp rated. The fixture requires 4 candelabra base bulbs with a recommended wattage of 40 watts and a maximum wattage of 60 watts. LED bulbs are recommended for extended use. The product comes with a center column kit, fixture body kit, mounting plate, wire connector, loop, ball nut, chain, fixture loop, metal candle sleeve, white PVC candle sleeve, and finial. The crystal set contains 24 sets of (1) 14mm and (1) AS9-1.5. The product is designed for indoor use only.
Product Usage Instructions
Before installation, ensure that the power is turned off to avoid electrical danger. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Attach the center column kit to the fixture body kit using the coupling and finial.
- Attach the mounting plate onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with loop.
- Put the metal candle sleeve onto the socket.
- Dress the crystals as illustrated.
Note that the product comes with a warning that it can expose you to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.p65warnings.ca.gov.
PART LIST
- A. (1)-Mounting hardware
- Wire connector x2.
- Mounting plate x1.
- Lock washer x1.
- Hex nut x3.
- Threaded nipple x1.
- Screw x4.
- B. (1)-Canopy ; Ø5″ ; 10.3mm center hole. XSN5024AWCAN5IN
- C. (1)-Loop; XSN5024AWTOLOOP
- D. (2)-Ball nut
- E. (1)-Chain(3mmx72″); XSN5024AWCHA3MM
- F. (1)-Fixture loop; XSN5024AWBOLOOP
- G. (1)-Center column kit; XSN5021AWBOB3.375IN
- Threaded nipple ; H8 1/4″
- Top bobeche ; Ø3 1/8″ ; 4pin ; 10.3mm center hole
- XSN5021AWBOB3.375IN
- Metal part ; H1.5″
- Column vase ; H5 7/8″
- H. (1)-Fixture body kit
- Coupling.
- Distributor box cover x2 ; Ø3″
- Distributor box ; Ø3″ ; 10.3mm center hole.
- 3.5″Arm x4.
- Bobeche x4 ; Ø3 1/8″ ; 4pin, 10.3mm center hole. XSN5021AWBOB3.375IN
- I. (4)-Metal candle sleeve ; H3 1/4″ XSN5021AWCDL3.25IN
- J. (4)-White PVC candle sleeve XSN5021WHCDL3.25IN
- K.(1)-Finial; XSN5024AWFIN
WARNING
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 4- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Damp rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Attach the Center column kit to the fixture body kit using the coupling and finial.
- Attach the mounting plate onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with loop.
- Put the metal candle sleeve onto the socket.
- Dress the crystals as illustrated.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>