delight 55356 Wireless Kinetic Wall Switch Control Unit User Manual
- October 30, 2023
- delight
Table of Contents
WIRELESS KINETIC WALL SWITCH CONTROL UNIT
USER MANUAL AND INSTALLATION GUIDE
User Manual
PRODUCT INFORMATION:
The control unit of Delight’s latest wireless, KINETIC switch family, which
can be connected to most circuits, thus switching the consumer. You must also
purchase one of the 55352, 55353 switches available from
Delight to use this product! Purchasing per unit allows for a modular design
so everyone can create a switch network to suit their own needs.
HOW IT WORKS:
Any consumer with a power not exceeding 500 W (100 V-230 V AC (50 / 60 Hz)
operating voltage) can be connected to the control unit. Consumers connected
to this control unit can be switched on and off using the button on the top of
the device or one of the wireless KINETIC switches. The control unit is easy
to teach, it can handle several switches at the same time, so it can be
installed as a toggle switch.
ATTENTION! PRIOR TO MOUNTING, MAKE SURE THAT THE CIRCUIT IS DE-ENERGIZED!
PAY ATTENTION TO THE CORRECT CONNECTION, IF YOU ARE UNSURE, ALWAYS SEEK
PROFESSIONAL HELP!
| Input voltage: | 100 – 230V AC (50/60 Hz) | Communication mode: | FSK |
|---|---|---|---|
| Max. power: | 500 W (min. 5 W) | Power transmission: | +10 dBm |
| Max current: | 10 A | Lifetime: | +200000 switching cycle |
| Built in glass fuse: | 10 A / 250 V | Mounting: | Screw, anchor, double sided |
tape (included)
Operating temperature:| 10 – 50 °C| Protection:| IP20
Operating radio frequency:| 433 MHz| Size:| 60 x52 x28 mm
Range:| max. 100 m| Color.| White
Operation type:| 86| Weight:| —50 g
WARNINGS:
DANGER OF SUFFOCATION!
- Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access it. Children should be supervised to ensure that they do not play with the appliance.
- The device may only be used for its intended purpose! The device may only be used by people who have read, understood and are able to operate this device accordingly! People with reduced mental, physical or sensory capabilities should not use the device! Children should not use the appliance! The device is designed for residential use!
- Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is strictly forbidden to use, modify or disable safety devices!
DANGER OF ELECTRIC SHOCK!
- If you are unfamiliar with connecting electrical equipment to the mains, seek professional assistance from an electrician!
- Always de-energize the circuit before connecting the device! Use a phase tester to make sure there is no voltage in the wires.
- DO NOT operate the control unit with a free cable end! Only switch on the appliance if you have connected all the cables and made sure that they are connected correctly!
- Attention! The device is equipped with a 10 A glass fuse, which is strictly forbidden and life-threatening to bypass!
- Do not use the device in a humid, environment, the device may only be used indoors in a dry area. Otherwise there is a risk of short circuit and electric shock!
- Thanks to the compact size, it is possible to hide the control unit, but even in such an installation, make sure that the device is properly ventilated!
- Only operate the device with the specified voltage (100 – 230 V AC)!
- Do not touch the device with wet hands! It is strictly forbidden to touch the device, including the cable, with wet hands!
- Before applying power to the device, check that the connection is correct and that the insulation is intact. Improper wiring can lead to accidents and property damage!
- Depending on the power of the consumer connected to the device, choose the cable required for connection, we recommend using cables with a cross section of at least 2 x 1 mm2 ! During use, pay attention to the integrity of the mains cable, avoid edges or objects that can damage the surface of the cable.
- Do not operate a device with a higher power rating than specified in the specification, as this may damage the device! In the event of damage, do not use the device, contact a specialist workshop!
- Secure the device to install the device safely. Use self-adhesive or a screw that can be applied to the mounting surface.
- Install the device in such a way that it is not exposed to direct sunlight or heat sources!
- Do not cover the device with any material! Do not disassemble the device! It is forbidden to change the parameters of the device!
- The manufacturer and the distributor are not liable for any damage resulting from improper use!
INSTALLATION OF THE CONTROL UNIT:
Connect the disconnected mains lead to the sockets marked “INPUT”.
- Socket marked “L” = “phase or live” cable.
- Socket marked “N” = “zero” wire
Connect the wires to the consumer to the sockets marked “OUTPUT”.
- Socket marked “L” = “phase or live” cable.
- Socket marked “N” = “zero” wire
CONTROLLER RESET:
Hold the button on the top of the control unit for 5 seconds to restore the factory settings. The control unit forgets the previously paired switches.
PAIRING OF SWITCHES:
Turn on the power to the control unit, then press and hold the button on the top for 3 seconds. A steady blue LED indicates that the device has switched to pairing mode. Then press the wall switch you want to pair briefly. After successful pairing of devices, the device can be controlled with the wall switch. Multiple wall switches can be paired with one control unit. Repeat the steps to add more switches.
FUSE REPLACEMENT, INSPECTION:
If the control unit does not work properly, we recommend that you check the power supply and the condition of the fuse. Disconnect the device from the power supply, then pull the fuse holder upwards by moving the door, marked “FUSE” on the top of the device and check the condition of the fuse.
CLEANING:
If the switch is accessible and there is dirt on the outer case, de-energize the device and wipe off any dirt with a soft, dry, microfiber cloth. Do not use a damp cloth! The cleaning operation is especially recommended if a layer of dust blocks the ventilation opening of the device.
DISPOSAL:
This symbol on the product or on its packaging indicates that this electrical and electronic product must not be disposed of with your other household waste. For proper disposal and reuse, please return this product to a designated collection point. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authorities or the nearest collection point for more details on disposal.