BABY DELIGHT Alpine Deluxe Portable Bouncer Instructions

BABY DELIGHT Alpine Deluxe Portable Bouncer

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE. Prior to using the product, check that the product and all parts were not damaged during delivery. Do not use this product if it is damaged or broken. Use from birth until baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.

Deluxe Portable Bouncer

Care & Instructions

WARNING

FALL HAZARD : Babies have suffered skull fractures falling while in and from bouncers.

• Use bouncer ONLY on floor.
• NEVER lift or carry baby in bouncer.

SUFFOCATION HAZARD: Babies have suffocated when bouncers tipped over on soft surfaces and/or when bouncers have been used as a sleep product.

• NEVER use on a bed, sofa, cushion, or other soft surface.
• NEVER leave baby unattended. Stay near and watch baby during use.
• This product is not safe for sleep or unsupervised use. If baby falls asleep, move baby as soon as possible to a firm, flat sleep surface such as a crib or bassinet.

To prevent falls and suffocation:

• Always use restraints. Adjust to fit snugly.
• STOP using bouncer when baby starts trying to sit up or has reached 20 lbs., whichever comes first.

To prevent injury

• NEVER adjust recline position while baby is in bouncer.
• Always check that recline adjustment is locked BEFORE each use.
• Do not use this infant bouncer seat if it is damaged or broken.
• NEVER use toy bar as a handle

Assembly/Operating

Tools required: Phillips Head Screwdriver Assembling the Bouncer

1. Connect FRONT BASE FRAME to BACK BASE FRAME with BOLT on the underside of the frame.
2. Connect the UPPER FRAME into the LOWER FRAME until tight with UPPER FRAME SCREW holes facing inward
3. Screw 2 FEET into underside of FRAME with 2 LONG FOOT SCREWS
4. Slide the FABRIC COVER over the FRAME.
5. Attach the two black elastic loops on bottom of FABRIC COVER to the chrome STEEL FRAME.
6. Attach the TOY BAR to the FRAME by pressing clips on to the FRAME
7. Fold chair upright.
8. Make sure the FRAME is securely locked into the RECLINE ADJUSTER. You should hear an audible “click

Using the 3-point harness:

• Unbuckle child restraint straps and place child in seat.
• Buckle child into child restraint and tighten straps for a snug and secure fit.

Reclining the Bouncer

1. The Bouncer has a 3 position recline.
   Click the FRAME BACKREST into any of the three positions of the RECLINE ADJUSTER until FRAME snaps into place

2. To do this, squeeze the red tab to unlock the RECLINE ADJUSTER

3. Push seat back forward.

4. Pull seat back to desired incline position.

5. Make sure the RECLINE AJUSTER is locked into the desired recline spot

Recommended Positions by Weight

• Highest and Middle Position: up to 20lbs
• Lowest Position: up to 15lbs

Folding the Bouncer:

1. Remove the TOY BAR flexing TOYBAR away from FRAME
2. Firmly pull the FRAME out of the RECLINE ADJUSTER by lifting the FRAME with one hand and lift red RECLINE ADJUSTMENT tab up while folding FRAME
   down flat

Care & Cleaning

Simply use a mild soap and damp cloth to wipe down the FRAME and FABRIC SEAT. To machine wash FABRIC COVER, wash on gentle cycle and hang to dry

Limited Warranty

• At Baby Delight, Inc. we make innovative and high quality products for babies, children and their parents. We warrant this product to be free from defects in material and workmanship for a period of 90-days from the date of initial purchase (sales receipt is required for proof of purchase). If such a defect is discovered during the limited warranty period, we will, at our sole option, repair or replace your product at no cost to you.
• This limited warranty does not cover claims resulting from misuse, failure to follow the instructions on installation, maintenance and use, abuse, alteration, involvement in an accident, and normal wear and tear.
• For warranty service or replacement part information:
• Please call 1-401-333-6800, email [email protected], or write to Consumer Services: 30 Martin Street, Cumberland, RI 02864
• Some replacement parts may be available for purchase after this limited warranty expires. Please visit us at www.babydelight.com or call us at 1-401-333-6800
  for details

www.babydelight.com ©2018 Baby Delight, Inc. 1-401-333-6800
ITEM #: BD05300, BD05530, BD05540, BD05550
MADE IN CHINA

References

• Products for comfort, safety and more - Baby Delight, Inc

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>