MERRA HCF-2813-00-BNHD-1 Decorative Vanity Light Instructions

October 30, 2023
MERRA

MERRA HCF-2813-00-BNHD-1 Decorative Vanity Light

Product Information

The product is a lamp fixture designed to be mounted on a wall. It comes with a canopy, mounting bracket, hangers, lamp holders, socket rings, crystal strips, and wire nuts. The fixture is rated for three E12 bulbs (not included) up to 40W each.

The product requires wiring in the wall and a junction box (not included) to be prepared before installation. The fixture should be assembled by connecting the mounting bracket to the junction box using the mounting bolts, making electrical connections using wire nuts, and securing the canopy against the mounting bracket using canopy nuts and mounting bolts. The hangers should be fit onto the lamp holders, secured using socket rings, and the crystal strips should be hung onto their hangers. Finally, the bulbs should be installed into the sockets.

WARNING
Read these instructions carefully prior to installation.

  • Check for electric, gas, and plumbing lines before drilling or consult a professional.
  • ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
  • DO NOT use with bulbs exceeding the recommended wattage.

ASSEMBLY INSTRUCTIONS

MERRA-HCF-2813-00-BNHD-Decorative-Vanity-Light-fig-1

  1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
  2. Unscrew the canopy nuts (E), remove the mounting bolts (C), and take the mounting bracket (B) off the canopy (D). Connect your mounting bracket to your junction box using the mounting bolts.
  3. Make electrical connections using the wire nuts (A).
  4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the mounting bolts and retightening them.
  5. Fit the hangers (G) onto the lamp holders (F) and secure them using the socket rings (H).
  6. Install your bulbs into the sockets. This fixture has been rated for three E12 bulbs (not included) up to 40W each.
  7. Hang the crystal strips (I) onto their hangers.
  8. Plug your lamp in, turn it on, and enjoy!

CONTACT US

Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.MERRA-
HCF-2813-00-BNHD-Decorative-Vanity-Light-fig-2

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MERRA User Manuals

Related Manuals