QUOIZEL TF5627MBK Braden 22 Inch Table Lamp Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
QUOIZEL TF5627MBK Braden 22 Inch Table Lamp
Product Information
The TF5627MBK Tiffany Lamp is a beautiful and elegant lamp that is perfect for any room in your home. Its Tiffany-style shade is designed with an oil film to protect it from scratches during shipping. The lamp comes with a socket assembly, big and small knurled nuts, a finial, rubber washer, check ring, base, spacer tube, flat washer, and nipple with hex nut. The recommended bulb type for this lamp is medium (E26) type A with a maximum wattage of 75W.
Safety Information:
Please handle the lamp with care to avoid damage to the shade or electrical
components. Do not exceed the recommended bulb wattage to avoid overheating
and potential fire hazards. If you need further assistance with installation
or maintenance, please contact Quoizel Customer Care at 1-800-645-3184 (9:00
am – 5:00 pm EST), or visit www.quoizel.com.
Care of Tiffany Style Shade:
To remove excess oil film from the shade, gently wipe it away with a paper
towel. For general cleaning of Tiffany shades, use a gentle lemon oil-based
furniture polish applied to a soft cloth and wipe gently. If a white powder
appears on the soldered joints of the Tiffany shade, use a small amount of
lemon oil or mineral oil applied directly to oxidized areas and the soldered
area will return to like new.
Product Usage Instruction
Installation Guide:
- Install Base and Socket Assembly together.
- Install Bulbs. Refer to fixture markings and/or labels for maximum wattage.
- Install Nipple with Hex Nut.
- Install Spacer Tube and Check Ring with Small Knurled Nut. Pull the cable out of the base during assembly.
- Install Shade with Rubber Washer, Flat Washer, and Big Knurled Nut. Make sure the shade, sockets, and base are in the same orientation after assembly.
- Restore electricity and your installation is complete!
Following these installation instructions carefully will ensure that your TF5627MBK Tiffany Lamp is properly installed and ready to use.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read the instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off the electricity to the fixture before replacing the bulb(s).
CARE OF TIFFANY-STYLE SHADE
- A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
- For general cleaning of Tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
- If a white powder appears on the soldered joints of the Tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixtures as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
INSTALLATION
-
Install Base and Socket Assembly together
Pull the cable out of the base from the base during assembly. -
Install Bulbs
Install two correct bulbs referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included): -
Install Nipple with Hex Nut
-
Install Spacer Tube and Check Ring
-
Install Shade
Make sure the shade, sockets, and base are in the same orientation after assembly (refer to the following diagram).
Your installation is now complete!
Restore electricity and save this sheet for future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>