Mente Marine ACS R/RP to a Bennett EIC 5000 Trim System Instructions
- October 30, 2023
- Mente Marine
Table of Contents
Mente Marine ACS R/RP to a Bennett EIC 5000 Trim System
Product Information
The ACS R/RP is a system that can be connected to a Bennett EIC 5000 trim system. It requires the removal of the original control panel and control unit. The ACS R/RP is connected directly to terminals 3,4,5,6 which are connected directly to the pump. The supply to the old control unit (Orange/red +, black -) can be used for the ACS. The black wire from the pump needs to be grounded.
Product Usage Instructions
- Remove the original control panel and control unit from the Bennett EIC 5000 trim system.
- Connect the ACS R/RP to terminals 3,4,5,6 which are connected directly to the pump.
- Use the supply to the old control unit (Orange/red +, black -) for the ACS.
- Make sure the black wire from the pump is grounded.
- After installation, refer to the user manual and verify the control direction according to the instructions.
INTRODUCTION
Terminal 3,4,5,6 are connected directly to the pump. The original control panel and control unit have to be removed. The supply to the old control unit ( Orange/red +, black – ) maybe be used for the ACS. Make sure the black wire from the pump is grounded. After installation, please verify the control direction according to the instructions in the user’s manual.
Mente Marine Ltd Vaasa, Finland
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>