etac 28423 Prio Attendant Brake Instruction Manual
- October 30, 2023
- Etac
Table of Contents
etac 28423 Prio Attendant Brake
Product Information
The product is a vehicle with rear wheel positions and requires assembly. The product manual provides assembly instructions that include a list of parts and their quantity, along with their positions. The manual also includes information on how to adjust the brakes for proper functioning.
Product Usage Instructions
- Begin by assembling the product using the assembly instructions provided in the manual.
- Refer to the list of parts and their positions while assembling the product.
- Once the product is assembled, adjust the brakes for proper functioning by following the below steps:
- Loosen nut (A).
- Loosen/tighten screw (B) until proper brake function is achieved.
- Tighten the nut (A).
Note: It is important to follow the instructions carefully while assembling and using the product to ensure safe and proper usage.
Assembly instructions
Assembly kit Drum Brake System Prio: 20”, 22”, 24”/16”
Rear wheel positions
To adjust the brakes, loosen nut (A). Loosen/tighten screw (B) in order to reach proper brake function. Tigh-ten the nut (A).
INSTALLATION INSTRUCTION
Attach of the brake wire
If the wire lock is lost
Etac Supply Center
AB Långgatan 12
SE-334 33 Anderstorp
www.etac.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>