TOBENONE UDS016D Triple Display USB-C Docking Station User Manual
- October 30, 2023
- TOBENONE
Table of Contents
UDS016D Triple Display USB-C Docking Station
User Manual
UDS016D Triple Display USB-C Docking Station
Thank you for purchasing our Multiport Docking Station
To use this Docking Station, the host USB-C port from your device must support
DisplayPort Alt Mode and Power Delivery. Our UDS-016D Docking Station support
MST(multi stream transport) for both Windows and macOS. It is easy to expand
your USB C port to dual HDMI ports, VGA port, support 3 USB 3.0 and USB 2.0,
RJ45 Ethernet, TF&SD card reader. If you need any assistance, please contact
our support team with your product model number, order number via Email.
Get Support: support@tobenone.com
Specifications
| Product Model | UDS-016D |
|---|---|
| Interface | USB C Host |
USB-A 3.0 Portx3
USB-A 2.0 Portx3
USB-C 3.0 date transfer x1
HDMI 1×1
HDMI 2×1
VGA x1
Ethernet p o r t (RJ45 port)x1
TF cart slotx1
SD cart slotx1
Audio/Mic 2 i n 1×1
DC port(power input)x1
Connector| USB 3.1 Type-C connector
HDMI 1 output port| Up to 4K UHD ( 3840+2160/60HZ ) work separately while
source is DP1.4
VGA| 1080P 60Hz
HDMI 2 output port| 26501440/60HZ
Ethernet port(RJ-45 port)| Support 10/100/1000 BASE-TX Auto MDI/MDI-X. Data
transfer: 1000Mpbs
USB 3.0 Type-A port| Data transfer speed: up to 5Gbp/s
USB 2.0 Type-A port| Data transfer speed: up to 480Mbp/s for wireless receiver
SD/TF card slot| Supported memory card capacity: up to 256 GB
Read/write speed: up to 104 MB/S SD/TF cards can’t be used simultaneously
USB-C 3.0 date transfer port| Up to 5 Gb/s date speed & Maximum power output
5A/0.9A
Mic/Audio| Support Mic and Stereo Audio 2 in 1. Jack standard: CTIA
USB-C 3.0 port| Connect to the host laptop
DC port| Charge the laptop through the USB-C port, & Maximum support of 20V/3A
and 55W.
Package Contents
- USB C Docking Station
- USB-C t o USB-C Cable
- Power Supply
- User Manual
- AC to DC Cable
How to use
1. Please download and install the driver before use
http://www.displaylink.com/downloads
Download driver from:
displaylink.com/downloads
2. Set the Extend Mode and Mirror mode
Extend Mode:
Mac: Setting: About This Mac>Display>Arrangement>Click Cancel Mirror Displays
Windows: Please click Intel Graphics Settings for multi-display setting or hot key: Windows P
Mirror Mode:
Mac: Setting: About This Mac>Display>Arrangement>Mirror Displays
Windows: Windows laptop does not support three external monitors to
mirror the laptop screen at the same time. 
Compatible devices: (Supporting Alt Mode and Power Delivery)
Including but not limited:
Apple: MacBook Pro 2016/2017/2018/2019/2020,
MacBook Air 2018/2019/2020,
Apple MacBook 2015/2016/2017/2018/2019/2020,
Acer: E5-575G
Asus: Q325UA, Zenbook Flip S , Zenbook 3 UX390UA,
eBook 3 UX490UA
Dell: XPS 12 9250, XPS 13 9350/9360/9370, XPS 15 9550/9560, Precision
5510/5520, Inspiron 7378/7389/7569,
Latitude 5285/5580/E7370/E7480, Precision 5510/7510 Lenovo: Yoga 720 13” &
Yoga 920, IdeaPad 720S,Mix 720,
1470/480/570, Thinkpad-X1, X270,
Razer: Blade (Late 2016), Blade Stealth (2015), Razer Blade
Stealth (2017)
HP. Specter x360 13, Chromebook 13 G1, EliteBook x360 G2
Samsung: Chromebook Plus, Galaxy Tabor S,
Notebook 9 13.3″
Huawei: Mate Book X Pro
Surface book2
Google Chrome Book pixel (2016/2017)
Partially Compatible Devices: (Supporting Alt Mode but not Power
Delivery)
Asus: Zenbook UX430UA, Zen Book Pro UX501VW
Dell: Dell Alienware 13 R3, Alienware 15 R3, G7 15 Gaming 7588,
Latitude 5480, Precision 7520/7720, XPS 15 9570
HP. Specter 13 – v111dx, Specter 13.3
MSI:Ghost Pro-002, MSI GT62 Dominator Pro
Huawei: Mat eBook X
How to use the new Display Link Manager App?
We recommend proceeding with following steps to install and use the new
Display Link Manager App. They are to be followed once after installing the
app.
1.1. First, uninstall the classic Display Link driver if you have it on your
computer. Simply run the driver installer and select Uninstall.
1.2. Download the Display Link Manager App and install it from the ZIP file
1.3. Navigate i n Finder to Applications and then open Display Link Manager
1.4. (Click the Display Link Manager App icon in the menu bar t o open the app. and you can confirm that the software has been installed and is running normally. Please select “Automatic startup” s o you can use the DS-CO2 after logging in.
1.5. Also you can check the support page t o check more details about the Display Link Manager App.
1.6. Now connect the peripheral with Display Link technology and navigate to your System Preferences to open Security & Privacy
1.7. Enable “Screen Recording” to allow the Display Link Manager app to
capture pixels and send them to your USB peripheral: Select the “Privacy” tab
Navigate to “Screen Recording” in the list on the left Then tick the “Screen
Recording” permission for Display Link Manager.
NOTE: Display Link driver requires that permission to capture pixels and
send them through USB. Display Link driver does NOT record screen data.
2. Because the new permission will only be active the next time you start the
application, macOS will invite you to “Quit Now”. Please accept. 
3. Now it has adequate permissions, re-open Display Link Manager from Applications in the Finder.
4. Your displays are now working properly.
Display Link Support https://support.displaylink.com/
The Display Link provides this support portal to try and answer common
questions you might have about Display Link technology. If this still can’t
solve your problem, please feel free to contact us via
support@tobenone.com.
Please Note:
- The HDMI 2 and VGA only work if you download and install the Display Link driver
- HDMI 1 and HDMI 2 can’t output audio simultaneously for Mac OS or Windows.
- The HDMI 2 port also output audio when you select 3.5mm audio port, it can’t audio output individually.
- AK@60Hz output only available when using a single HDMI 1 display. If HDMI2 displays are connected, for Mac Laptop, the maximum resolution is 2560*1440 and 2048+1152 for your Windows Laptop that can’t achieve 4K.
- 2.4Ghz wireless devices such as wireless keyboard/mouse receivers, Bluetooth and WiFi adapter do not work in the USB3.0 ports, please try to connect the USB2.0 ports.
- You unplugging the PD interface with your Mac laptop will cause the all other interfaces to be disconnected and reconnected which take 50s-90s. If you reconnect the PD power adapter in the waiting time, The HDMI 2 and VGA interfaces will reconnect automatic in 6s. But HDMI 1 is still be screen off, and your Mac laptop is not charged.
- Due to power output limitations of some laptops, it is recommended that you connect only one HDD/SSD at a time.
- It is NOT recommended that using the USB A port for charging iPads,tablets or smart phones.
Register your product for a FREE upgrade to a 24-Month Warranty
www.tobenone.net/warranty