TOBENONE UDS025 Docking Station User Guide
- October 30, 2023
- TOBENONE
Table of Contents
USB-C Dual Monitor Docking Station
with M2 NVME/SATA SSD Enclosure
Quick Start Guide
UDS025 Docking Station
Free Warranty Extended
Register your product for a FREE upgrade to a 24-Month Warranty:
https://tobenone.com/pages/warranty
THANK YOU!
Thank you for the purchase of the Tubenose USB-C Triple Display Docking
Station with M.2 NVMe/SATA SSD Enclosure UDS-025! Our dock equipped with 2
HDMI,VGA, M.2 SSD Enclosure, Switch on/off, USB-C 3.1,USB-A 3.1, USB-A
3.0,USB-A 2.0,PD 3.0,RJ45 Gigabit Ethernet, SD/Micro SD Card Readers, 3.5mm
Audio &
Ports and connectors
Front:
-
LED indicator
-
Switch on/off
-
3.5mm Audio & Microphone
-
USB-C3.1:10Gbps,5V/0.9A
-
SD/Micro SD Card Readers Read: 50-104MB/s,
Write: 30-80MB/S Data transfer rates are subject to the speed of the memory card itself and your computer’s USB ports -
USB-A3.1:10Gbps,5V0.9A
-
USB-A 3.0: 5GBPS, 5V/0. 9A
-
M2 SSD Enclosure(‘note: SSD is not included)Compatible SSD: a M2 NVME SSD (M Key and B&M Key)10GB/sb M2 SATA(B&M Key) 5GB/applicable sizes 80mm(2280), 60mm(2260), and 42mm(2242)M. 2 form factor SSDS NOTE:
Not compatible with M2 SATA B Key SSDS, M2 Pcle AHCI SSDS, M2 Pcle devices such as Wi-fi and capture cards, MSATA SSDS. and other non-m.2 form factors SSDS
Back:
-
USB-C Host: Connected to MacBook with a dual USB-C cable
-
PD 3.0: Attach the power supply
-
VGA: 1080P/60HZ
-
USB-A 3.0: 5Gbps, 5V/0.9A
-
RJ45 Gigabit Ethernet: 1000Mbps
-
USB-A 2.0: 480Mbps, 5V/0. 5A
-
HDMI 1: 4KX2K 60HZ / 3840×2160 work separately while the source is DP1.4) 4KX2K 30HZ/3840×2160 (work separately while source is DP1.2)
-
HDMI 2: 4KX2K 60HZ / 3840×2160 work separately while the source is DP1.4) 4KX2K 30HZ/3840×2160 (work separately)
macOS with the new Apple Silicon M1 chip can only extend one
HDMI1 + HDMI2+VGA
step 1: Connect the laptop power supply to the PD port (Port 15 )
Step 2: Connect the dock and your laptop via dual USB C cable as provided
Step 3: Connect monitors and VGA via HDMI 1(Port 15 ) / HDMI 2 (Port
16 )/ VGA (Port 11 ) cables are not included
Step 4: For wireless devices, please attach the devices to USB 2.0(Port
14 )
Step 5: For data transfer, please attach the devices to USB 3.0 (Port
7 ) 5Gbps/USB 3.1 (Port 6 ) 10 Gbps/USB C (Port 4 )10 Gbps
Step 6: Insert SD card, TF / Micro SD card into SD / TF slot(Port 5 )
Step 7: Connect speaker/headphone or microphone to audio port (Port 3
) Connect the Ethernet cable to RJ45 Ethernet port (Port 13 )
Step 8: Please push open the top cover of the product by hand before
using M.2 SSD enclosure (Port 8 ) and confirm whether your hard disk
interface matches the product in detail (More detail, please check the below
picture)
Note:
- it’s normal that the SSD Enclosure heats up since the high-speed SSD drives while working.
- At the first time to use the M2 SSD, you should format it before using it. Only in this way can SSD be recognized by computers laptop
Any questions, we are here to help!
Email: [email protected]
Because the only questions we can’t fix is the one we don’t know.
https://tobenone.com/pages/warranty
For any inquiries, please contact us:
[email protected]