TOBENONE UDS022 USB-C Docking Station Dual Monitor User Guide
- October 30, 2023
- TOBENONE
Table of Contents
TOBENONE UDS022 USB-C Docking Station Dual Monitor
Free warrantv Extended
Register FREE 24-Month Warranty at
www.tobenone.com/warranty
THANK YOU!
Thank you for your purchase of the Tobenone 11-in-l USB C Dual Monitor Dock
UDS-022. This dual-monitor docking station can help to expand Windows laptop’s
USB C port to two HDMI, SD & microSD card slots, 3.5mm audio& Mic, USB-A,
USB-C, DC-IN, and RJ45 Gigabit Ethernet, so you can easily connect multi-
devices via one USB-C cable.
Purls and conneclors
- Audio Port: Connect to earphones or other devices with a 3.5mm connector
- SD 3.0 card reader support read: 88MB/s, write: 38MB/s
- Micro SD card reader support read: 88MB/s, write: 38MB/s
- USB A Port: Support data transfer at speeds up to 5Gbp/s.
- USB-A 3.1 Port: Support data transfer at speeds up to 1 0Gbp/s
- USB-C 3.1 Port: Support data transfer at speeds up to lOGbp/s
- DC-IN Port: Charger your laptop through the DC port, power supply included
- Etherent Port: Supports 10/100/1000 Mbps
- HDMl2 Port: Connect to a device with an HDMI port to stream video at resolutions up to 4K 3840×2160@60Hz C DP1 .4) 13840x 2160@30Hz CDPl .2)
- HMDI 1 Port: Connect to a device with an HDMI port to stream video at resolutions up to 4K 3840×2160@60Hz C DPl .4) I 3840x 2160@30Hz CDPl .2)
- USB-C Host: Connect to your Full-feature USB C Windows laptop
Note: This laptop triply display dock only can work for Full-feature USB C Windows laptops, not for macOS!
Quick Start Guide
Please follow Below Slep 10 Using Your Dock
Step 1: Please plug the power adapter to the DC-IN port(7)
Step 2:Please connect the USB C host (11) of the dock UDS22 and the USB C port
of the Windows laptop via USB-C cable as provided
Step 3:Using a standard HDMI cable to connect the first HDMI monitors via HDMI
l port(10)
Step 4:Using a standard HDMI cable to connect the second HDMI monitors via
HDMI 2 port(9)
Step 5:Attach USB 3.0,USB2.0 and USB-C devices to the USB ports of the dock(4
5 6). Attach SD and microSD card to the card slots(2 3)
Step 6:Connect Speaker/headphone or Microphones to the audio port(1)
Step 7:Connect the ethernet cable to Ethernet port(8)
Dual HD Exlended Monilors Conliuuralion
Troubleshooting
Q: There’s no video output after connecting the product.
A: Please make sure the port you are plug in the product is USB C 3.1 or
Thunderbolt 3/4 ports which support Power Delivery and Alt Mode DisplayPort.
You can check this by the manual of your laptop or contact your laptop
manufacturer for support.
Q: My USB device being detected, but It shows an unrecognized error on the
screen.
A: First connect the power supply to the DC-IN port, then connect all other
devices, and finally reset the SMC (System Managment Controller)
Please unplug and plug in again.
Any questions we are here to help!
Email:[email protected]
WhatsApp:(910)808-9381
Because the only question we can’t fix is the one we don’t know
