O DADDY DGROD62-NS Bedside Tables Industrial User Manual
- June 9, 2024
- O DADDY
Table of Contents
O DADDY DGROD62-NS Bedside Tables Industrial
Instruction
General Guidelines
- Please read the following instruction carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
Notes
- The product is intended for indoor use only. The product must be assembled and used in accordance with the provisions of the manual. Personal injury and/or damage to the product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design. The seller does not assume any responsibility or liability with respect to any injury/damage caused by incorrect assembly or improper use.
- Avoid long-term exposure to humid environments to prevent mildew.
- Keep the product away from fire sources and high temperatures. Do not expose the product to direct sunlight.
- Do not place any hot objects on the surface of the product.
- If there are any defective or missing parts after unpacking, please cease assembly immediately and contact us.
- Please assemble the item on a spacious surface and do not place the unwrapped product directly on the ground to avoid product damage.
- Please do not stand or sit on the wooden boards.
- Please wear gloves during the assembly and/or disassembly process to avoid scratches from any sharp edges.
- Please match the corresponding part and fitting based on the part number in the manual.
- If the part does not match the fitting, please check the piece as specified in this manual.
- During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one.
- Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural integrity.
- If you accidentally spill water or another liquid on the surface, immediately wipe clean with a dry towel.
- Please keep the product away from sharp, pointed objects and corrosive substances to prevent product damage.
- Please place this item on level, solid ground during use.
Warnings
- During assembly, keep all small parts out of the reach of children. It may be fatal if swallowed or inhaled.
- Children are not allowed to climb or stand on the product to avoid personal injury caused by the product tilting or tipping over.
- Please do not use the product if there is/are defective and/or missing part/s, as this can result in damage or injury.
- To avoid the potential dangers of suffocation, please keep all parts and packaging (film, plastic bags, foam, etc.) away from babies and children.
- The maximum static load capacity of each shelf inside the cabinet is 15 kg (33 lb), and the top surface is 30 kg (66 lb) each. Please do not place overweight items on the product.
Parts
Overview
Tools Required
Tips
If there is any damage after unpacking or you have any questions during
assembly, please feel free to contact us at your earliest convenience. Our
customer care team provides professional returns or exchanges as well as
assembly guidance.
Assembling
During assembly, first loosely align all screws with the corresponding pre-
drilled holes and then tighten the screws one by one.
Before attaching the back panel, make sure that the angle of part C and part D
is 90°.
Apart from the backboard, the other wooden boards don’t come with screw holes.
The installation of the backboard requires 2 people to insert the screws from
the holes of the backboard into the frame of other boards with a screwdriver
directly.
Read User Manual Online (PDF format)
Loading......