Home Accents 22RT5792215YX 5.5ft Yuletide Lane LED Motorcycle Santa Silhouette Instruction Manual
- October 30, 2023
- Home Accents
Table of Contents
Home Accents 22RT5792215YX 5.5ft Yuletide Lane LED Motorcycle Santa
Silhouette
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended to assemble parts of the product while laying flat on the ground or table versus standing the item up to assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service center or return to the place of purchase with the purchase receipt. Assembly of this product may require more than one person. 1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION: Grasp the plug to insert or remove it from the power source. Do not unplug by pulling on the cord.
CAUTION: The lighting string on this product is rated at 19.2 Watts ( 0.16 Amps). Do not overload. Do not connect to another lighting string, decorative outfit, or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to the place of purchase with the purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed copper wire, or other obvious damage.
Care and Cleaning
- Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the product connections and wires. If the product is placed somewhere other than the ground it should be well secured and flat.
- Carefully disassemble the unit taking caution not to cut any electrical wires.
- Wipe the unit with a damp cloth and allow the unit to dry before storing.
- Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
- Ensure that the ground or surface that the item sits on is flat and level
- Be sure to plug the item correctly into a wall outlet or a UL Listed Power Cord
- Ensure all parts are assembled properly per the Instruction Manual
- If the item does not light check for loose or broken bulbs and connections
- Do not plug into other electrical items
- If the item has multiple Light String Cords be sure to plug in all cords
- Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per
year. This product is covered by a 90 days limited guarantee due to defects in
material and workmanship. Return the product with purchase receipts to the
location of purchase for a refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear, and tear, products
not used in accordance with directions provided on or with the product,
burnout of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification, and damage caused by shipping and
improper handling, alterations, misuse, in-store display models or accidents.
Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
1-855-HDHoliday (1-855-434-6543) HOMEACCENTSHOLIDAY.COM
Diagram of Parts
Parts List
Locater| Name| Qty.
A| Top Section of Santa’s
Body
| 1
B
| Bottom Section of Santa’s Body and Back
Half of the Motorcycle
|
1
C| Front Half of the
Motorcycle
| 1
D| Base Stand| 1
E| Support Bar| 1
Hardware List
Locater| Name| Qty.
F| Plastic Tie| 15
G| Cotter Pin| 4
H| Ground Stake| 5
ASSEMBLY
Assembling the Body of Santa and the Front Half of the Motorcycle
- Place all the parts flat on the ground or table. Insert the connecting rods on the bottom of the Top Section of Santa’s Body (A) into the matching connecting holes on the top of the Bottom Section of Santa’s Body and the Back Half of the Motorcycle (B) and fasten at the connecting loops with Plastic Tie (F). Insert the connecting rods on the bottom of Santa’s hand into the matching connecting holes of the Motorcycle handle. Insert the connecting rods of the Motorcycle Body into the connecting holes on Santa’s Leg and fasten at the connecting loops with a plastic Tie (F). Hint: With extra Plastic Ties, secure the parts over the metal frames at various locations where they adjoin.
Assembling the Base Stand and Support Bar
- Insert the connecting rods on the top of Base Stand (D) into the matching connecting holes on the bottom of the back wheel and the underside of the Motorcycle then fasten at the connecting loops with Plastic Tie (F). Insert each hooked end of the Support Bar (E) into the matching connecting holes on the top of the Arm and the Base Stand (D) then secure with the Cotter Pins (G).
Assembling the Power Plug
- Connect the power cord plugs together and secure them with the built-in cap screw.
Assembling the Ground Stakes
- Place the 4 Ground Stakes (H) over the 4 Corners of the Base Stand and the Front Wheel then firmly into the ground.
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this 5.5ft Yuletide Lane LED Motorcycle Santa Silhouette. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Accents!