KlipXtreme KBS-015 Dyna Portable Speaker User Manual

KBS-015 Dyna Portable Speaker
User Manual Dyna
KBS-015

Introduction

Thank you for purchasing the Dyna portable speaker with wireless technology from KlipXtreme. We encourage you to read this user’s manual thoroughly to get the most of this innovative wireless portable audio device.
Main features

• Equipped with TWS technology, designed to stream audio wirelessly through two identical units simultaneously, at a distance of up to 30 feet
• Lithium-ion, 1200 mAh built-in rechargeable battery for up to 8 hours of playback time on a single charge
• Compatible with Bluetooth® v5.0 and improved for a longer distance between the sound source and the speaker unit
• IP67 protection rating against dust and water
• Great output power through a 45 mm full range driver
• Amazing bass sound through its passive radiator
• Features a built-in microphone for hands-free conversations
• Compact design with a convenient handle cord for easy transport
  1. Second speaker not included. TWS function works only with the same type of unit.
  2. Depending on the volume level and type of audio files played.
  3. Can be submerged in water up to 1 meter for 30 minutes.

Package content

• Speaker unit   (1)
• USB-C charging cable  (1)
• User’s manual  (1)

Product diagram

1. Power on and off / mode

2. Volume down – / previous track

3. Play / pause / phone call answer

4. Volume up + / next track

5. USB-C charging port

6. On/Off – Bluetooth® mode indicator:
   • Press and hold this button to turn the speaker on and off.
   • To connect it to Bluetooth® mode, first make sure the speaker is within three meters from the mobile device.
   • Once you’ve turned the speaker on, the LED light will blink blue to indicate it has entered into paring mode.
   • Select KBS-015 on your device’s Bluetooth menu. An audible tone will indicate the speaker has paired.
   • If a PIN is required, enter “0000” (4 zeros).
   • Once paired, the blue LED light will turn solid.
   • An audible tone will also indicate the device has been disconnected.

7. Volume – / Previous track:
   • Press this button to decrease the volume level.
   • Press and hold briefly to play the previous track.

8. Play / pause / call management:
   • Press this button to play or pause your music.
   • For hands free mode: Press the play/pause button to answer and end a call.
   • If the speaker is playing music while receiving a call, it will automatically resume playback after the call has ended.
   • Press and hold if you wish to reject an incoming call.
   • Press the Play button twice to redial the last number called (on supported devices).

9. Volume + / Next track:
   • Press this button to increase the volume level.
   • Press and hold briefly to play the next track.

10. Type C charging port:
    • Charges the built-in battery of the speaker.

Charging the speaker

• Plug one end of the supplied USB-C cable into the speaker and the other end to the USB port of your computer, laptop or AC adapter.
• Make sure that your portable speaker is fully charged before using it for the first time.
• The battery will take about 2 hours to fully charge.
• While charging, the LED is solid red. When the battery has reached full capacity, the LED light will turn off.

Instructions for the TWS feature on this speaker

1. To turn on the speakers, press and hold the power button for about 3 seconds on each speaker, simultaneously. The blue LED will start blinking quickly in both speakers. Press the play button once, on either speaker, until a tone is heard. The LED light will eventually turn solid blue, on the secondary speaker, when paired to the primary speaker.
2. The speaker with the blinking LED light will automatically become the primary speaker. The LED will remain blinking while it is in pairing mode with your mobile device, and once paired, the LED light turn solid blue.
3. In order to disconnect from TWS, press and hold the play button, on either speaker, until a disconnect tone is heard.

Using the speaker to answer and end a call

• When there is an incoming call, the speaker will generate a tone to alert you of this event.
• Briefly press the play/pause button to pick up. You may also press the answer button on your cellular phone to take the call using the speaker.
• Speak with a clear voice right into the built-in microphone of the speaker.
• To end a call, tap the play/pause button once again. Likewise, you may also end the call directly using the command on your cell phone.
• When listening to music using your mobile phone, playback will resume automatically once the call has ended.
• By pressing the play/pause button twice, the phone will redial the last number called (on supported devices).

Technical specifications

Special features
Waterproof rating| IP67
Hands free| Ye s
Special feature| True Wireless Stereo (TWS) capability2
Speaker
Driver unity| 45mm full range driver + passive radiator
Power output (RMS)| 6W
Frequency| 55HZ-20KHZ
Impedance| 4 Ω Ohm
Sensitivity| -90.5 dB
Signal to noise ratio| BT ≥ 80 dB
THD| <10 %
Microphone
Directivity| Omni-directional
Frequency| 100Hz-8KHz
Impedance| 2.2 K Ω
Sensitivity| -39dB±2.1M
Connectivity
Connection type| Bluetooth® V5.0
Wireless RF frequency| 2.402-2.480GHZ
Wireless range| Up to 32 ft
Battery
Type| Built-in lithium-ion 1200 mAh battery
Charging time| 2 hours
Runtime| Up to 8 hours at 50% volume
Standby time| Around 48 hours
Charging port| USB type C
Specifications
Product dimensions| 3.85 x 1.8 x 3.2 in
Product weight| 6.8 oz
Cable length| 1.64 ft
Package contents| Speaker, user’s manual, charging cable
Warranty| 1 year

1. Can be submerged in water up to 1 meter for 30 minutes.
2. Second speaker not included in the box. TWS function works only with the same type of unit.
3. Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight between devices.
4. Depending on the volume level and type of audio files played.

Precautions

• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the speaker yourself.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT place heavy objects on top of the speaker.
• Do NOT use near a microwave oven or wireless LAN products.

FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes and is not to be construed as a claim to any rights pertaining to, sponsorship by, or affiliation with, those brands. Made in China.

www.klipXtreme.com

References

• Home - Klip Xtreme

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>