Nakamichi NBT-1006A 10 Inch Active Tunnel Tube User Manual
- June 6, 2024
- Nakamichi
Table of Contents
NBT- 1206A
User Manual
10 Inch Active Tunnel Tube
nakamichicaraudio.com
nakamichi.global
nakamichi.caraudio
YOUR SUBWOOFER
Dear Customer,
Congratulations on purchasing our Nakamichi mobile system product for your
sound system.
This product has been designed and manufactured to Nakamichi’s exacting
standards to ensure many years of audio enjoyment. For the best performance,
we recommend that you have your Nakamichi product installed by an authorized
Nakamichi dealer.
If you would like to install this product on your own, we recom-mend for you
to go through this manual to familiarize yourself with all the installation
requirements and procedures.
If you encounter any issues or if you have any questions on the operation of
this product, please contact your nearest authorized Nakamichi dealer for
assistance, or you may also contact us through our website or social media
channels.
Installation of Your Product
In today’s modern vehicles, it is very easy to cause damage to existing
systems through improper installation. Please follow and scrutinize all wiring
diagrams to ensure that you have connected everything in its proper place. If
you find yourself uncomfortable of unfamiliar with understanding the wiring
and installation diagrams or testing instructions, do contact your nearest
Nakamichi dealer to perform the installation for you.
Safety Warnings and Considerations
- Clean only with a dry cloth or other similar materials.
- Install your product in a dry, well-ventilated location that does not interfere with your vehicle’s safety equipment.
- Do not block any ventilation openings when installing this product.
- Do not mount the product in the engine compartment of your vehicle or in any areas of extreme heat such as mufflers, silencers, exhaust pipes, or other heat-producing apparatus.
- Securely mount the product so that it does not come loose in the event of a collision or as a result of repeated vibrations that might occur during normal operation.
- Installation of the apparatus must be done with great care to prevent damage to your vehicle’s fuel lines, power, and electrical wiring, hydraulic brake lines, and other systems. If possible, always visit your nearest Nakamichi dealer to perform the installation.
- Do not run any wiring outside or underneath the vehicle. Keep all wires inside the vehicle.
- Take the necessary precautions when making connections to the vehicle’s battery to avoid any potential shock.
- Protect all system wires from sharp edges by carefully routing them, always use rubber grommets to protect wiring and cables whenever you are installing them through metal openings.
- Secure all wiring using cable ties or wire clamps to protect them from moving parts and sharp edges.
- This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids shall be placed on the apparatus.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power input terminals are damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Fuses shall be replaced only with the correct type and fuse value, and only when the apparatus is powered off.
- Exposure to high sound pressure levels may lead to permanent hearing loss. Take every precaution to protect your hearing.
- This product is designed specifically for use with 12 volts, negative ground electrical systems only. Using this product in systems with the positive ground and/or voltages other than 12V may result in damage to the product and your system.
SPECIFICATIONS
Subwoofer:
N-power:
MAX Power:
Sensitivity(dB/W/m):
Frequency Response:
Impedance: Voice Coil:
Subwoofer Magnet:
Magnet Mass:
Unit Dimensions
Net Mass (lpc):| 10″ Active Tunnel Tube
100 watts
650 watts
90 ± 3dB
20Hz – 200Hz
4Ω
ASV Φ35.5mm
120x60x20mm, Y30
29Oz (830g)
480x335x357mm
Approx. 6.4kg
---|---
DIMENSION (UNIT: MM)
WHAT’S IN THE BOX
Check and identify the contents of your package:
- Tunnel Tubex 1 pc
- User Manual x 1 pc
- Installation Bracket x 2pcs
- Screw Φ4x20mm x 8pcs
- Fuse 15A x 1 pc
PANEL FUNCTION
-
Fuse Socket Always replaces the fuse of the rating prescribed.
-
Power Input Terminal
• POWER(GND) must be connected to the chassis of your vehicle with a perfect electrical connection (remove some paint to reveal bare metal if necessary) and with the ground cable.
• REMOTE connect the electrical aerial output or the remote output of your radio with the remote cable.
• +12V connect the +12V power supply of the car battery with the power cable. (Note: power connections). -
Crossover, there are 2 optional modes for the crossover: FULL, L.P.F.
-
Gain Increase or decrease the volume level.
-
Remote Control Attach the included remote level control to control the volume level of the subwoofer independently.
-
Low-Level Inputs The unit accepts low-level RCA inputs here.
-
Freq Low Pass Filter adjustment.
-
Power indicator Light When the power is turned on, the power indicator shows green.
INSTALLATION
Power Connections
*Place the fuse in the power supply lead as close as possible to the car battery.
http://www.nakamichicaraudio.com
CONNECT WITH US ONLINE TO EXPLORE NAKAMICHI’S COMPLETE RANGE, INSTRUCTIONS &
SOFTWARE DOWNLOADS, AND WARRANTY REGISTRATION.
WWW.NAKAMICHICARAUDIO.COM
nakamichi.global
nakamichi.caraudio
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>