ACHOICE F1 True Wireless Stereo Earbuds User Manual

ACHOICE F1 True Wireless Stereo Earbuds User Manual

Product Diagram

Charging

Fully charge the charging case before first use. Connect the charging case to a USB charger or charging port with the included USB-A to C cable. When all 4 LED charging indicator lights are white, the case is fully charged. Charging takes around 2 hours, and after being fully charged, the case can fully charge the earbuds 4 times. The earbuds should be stored in the case when not in use. When the earbuds are charging in the case (with the case itself not charging), the LED indicators on the  earbuds will turn solid red. When the indicators turn off, the earbuds are fully charged

Led Indicator

Pairing

1. Turn on the pairing function on your device

2. Select F1

Starting with the earbuds in the case

1. Open the lid of the charging case. Both earbuds will turn on automatically and connect with each other.
2. Turn on the pairing function on the device you want to pair with the earbuds.
3. From the list of available devices, find and select FI.
4. If a code or PIN is required for pairing, enter “0000″.

LED Indicators

Regular Use After Pairing

Once the earbuds are successfully paired with your device, they can be switched on and off as follows

connect with each other automatically
Turn Off| To turn off, put the earbuds back in the charging case and close the lid. They will begin charging

Using the Left/Right Earbud Only

Staking with the earbuds in the case

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select F1

Notes

• When you turn on the earbuds, they will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found.
• In pairing mode, the earbuds will automatically turn off after 5 minutes it no devices are paired.
• If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again.
• The maximum wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps.

Clearing the Pairing List

1. Make sure both earbuds are off and in the charging case. Take one of the earbuds out.
2. Tap the touch-sensitive panel 5 times, and then the earbud will enter pairing mode. note: keep one earbud in the charging case, and the lid is closed, when you operate the other one.
3. Tap the touch-sensitive panel 7 times to clear the previous pairing list, and the earbud will turn off.
4. Take the other earbud out of the charging case and repeat the previous steps 2 & 3.
5. After that, put both earbuds back in the charging case and close the lid. Open the lid again, and both earbuds will turn on automatically and are ready to pair

Streaming Audio

Once paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.

Play or pause
Tap the touch-sensitive panel on either earbud

Skip to previous track
Double-tap the touch-sensitive panel on the left earbud

Skip to next track
Double-tap the touch-sensitive panel on the right earbud

Active Noise Canceling

Active noise canceling functionality requires the use of both earbuds.

Turn on/Off

Touch and hold the touch-sensitive panel on the left or right earbud for 2 seconds to turn on/off the noise canceling function

Taking Calls

Answer or end a call
Tap the touch-sensitive panel on either earbud to answer a call, and touch and hold for 2 seconds to end the call.

Reject an incoming call
Touch and hold either earbud for 2 seconds

Use Siri or other voice assistants

White your device is connected, triple-tap either earbud

FAQ

The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.

I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the audio can be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.

The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range related issues.

What’s the wireless range of the earbuds?
The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.

The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in ’Warranty & Customer Support. ’ Web: www.fitpolo.net

I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.

Product Care & Use

• Keep away from liquids and extreme heat.
• Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part J 5 of the FCG Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>