ANKER 535 USB-C Hub User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER 535 USB-C Hub
At a Glance
| 1. USB-C Upstream Connector | Plug into your iMac’s Thunderbolt port |
|---|---|
| 2. SD 4.0 Card Slot (UHS-II) | 312 MB/s data transfer |
| 3. microSD 4.0 Card Slot (UHS-II) | 312 MB/s data transfer |
| 4. USB-A 3.1 Gen 2 Port | 10 Gbps data transfer |
5. USB-C 3.1 Gen 2 Port
| •10 Gbps data transfer
•Supports 7.5W charging for small devices like smartwatches and headphones
6. Power Indicator| Turns solid white when the hub is connected to an iMac
Specifications
- Data Transfer Speed: 10 Gbps
- Supported Devices: 2021 iMac M1 (24″) 2020/2019/2017 iMac & iMac Pro (21.5″/27″)
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party：
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973