VIISAN P2U 2-in-1 Document Camera and Webcam User Guide
- June 6, 2024
- VIISAN
Table of Contents
2-in-1 Document Camera & Webcam
Model No. P2U
Quick Start Guide
Get 24/7 Assistance
Use a camera or QR scanner to scan Or Visit at
https://viisan.afterservice.vip
Before Use
Thank you for purchasing the VIISAN product. The P2U is a 2-in-1 Document Camera & Webcam designed for remote learning and live demonstration. This quick start guide briefly describes how to use this product. If you have any technical or service questions about the product, please feel free to e-mail our customer service via [email protected] and we will provide you with service and support.
What’s In The Box?
NOTE: When unpacking the product, please check if the product and accessories are intact carefully. If there is anything missing or damaged, please don’t hesitate to contact our customer service via [email protected]
Parts Descriptions
-
Autofocus / Flip Button
Press once: Autofocus
Press and hold Flip Image 0/180° -
LED Light Button
Press to turn on the LED light (3-level brightness control) -
Micro USB Port
-
Power LED Indicator
-
Flip Camera Head 0 / 180°
-
Microphone
-
AF Lens
-
LED Light
-
Base Plate
Getting Started
-
Push a finger through an opening at the base of the device to lift the camera arm.
-
Press against the base plate of the camera and pull it up then flip the camera head.
-
Adjust the arm to change the height and position for capturing your materials. Fully extend the camera arm to capture the maximum shooting area of A3.
Connection Settings
- Plug the supplied USB cable to the camera and connect another end into the computer’s USB port (PC, Mac, or Chromebook).
- Attach the cable organizer to the camera arm.
Using the compatible software
The P2U is a standard UVC camera, you can use it with a variety of software as
long as they recognize the video source coming from a UVC camera. For example,
you can use it with third-party video conferencing software like Zoom,
Microsoft Teams, or Google Meet. However, to get the full functional- ity of
this Document Camera, we’d recommend using it with VIISAN VisualCam software
and you can download this free software from VIISAN’s support center at the
below link.
Download the compatible software & user manual at https://www.viisan.com/en/download/type4.html
Specifications
| Image Sensor | 5.0-Megapixel 1/4″ CMOS |
|---|---|
| F/NO (Infinite) | 2.0 |
| Max. Shooting Area | 410 x 308mm |
| Max. Output Resolution | 5.0MP (2592 x 1944) |
| Output Resolution / FPS | MJPEG: |
2592×1944@30fps, 2560×1440@30fps 1600×1200@30fps, 1920×1080@30fps
1280×720@30fps, 1024×768@30fps 960×540@30fps, 40×480@30fps 640×360@30fps
YUY2:
1280×720@10fps, 1024×768@15fps 960×540@15fps , 640×480@30fps 640×360@30fps
Video Format| MJPG / YUY2
Focus| Auto / Manual
Lamp| LED
Image Rotation| 0° / 180°
Power Frequency| 50 / 60 Hz
Connectivity| USB 2.0
Microphone| Built-in Omnidirectional Microphone
Powered By| USB (5V/500mA)
Protocol| UVC / UAC Compliant
Support OS (UVC)| Windows, macOS, Chrome OS
Dimensions (L x W x H)| Extended: 393x66x346mm / 15×2.5×7.6 inch
Closed: 195x66x13mm / 7.6×2.5×0.5 inch
Net Weight| 430g / 1.05lbs
NOTE: Specifications are subject to change without notice
Authentication
Federal Communications Commission Statement (Class B)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.
CE Class B (EMC)
This product is herewith confirmed to comply with the requirements set out in
the Council Directives on the Approximation of the laws of the Member States
relating to Electromagnetic Compatibility Directive 2014/30/EU.
Product Disposal
This symbol on a product or on its packaging indicates that the product must
not be disposed of with other household waste. Instead, it is your
responsibility to ensure disposal of waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment usually at a Local Amenity Site. The proper recycling of
your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human
health and the environment.
Warranty Information
-
Warranty Period.
This product is warranted to be free from defects in materials and workmanship for a period of (1) ONE YEAR from the date of original purchase. -
The following circumstances SHALL NOT be covered by the Warranty.
・ Product damage caused by catastrophes, thunder stroke, faulty electric power, and environmental factors.
・ Defacing of product labeling (label alterations and falsifying, serial number missing, serial number no longer discernible, serial number invalid). Please note that all serial numbers are recorded and tracked for warranty purposes.
・ Unauthorized changes of non-parts, modifications or alterations, parts removal in or to the products.
・ Damage caused by operator error or operator fails to comply with the instructions described in the user manual, including but not limited to improper storage resulting in the product getting wet, corrosion, being squeezed, or exposed to inadequate temperature or humid environment.
・ Accessories or packing materials such as boxes, user manuals, etc.
Contact Us
If you encounter any problems when using the product, please feel free to contact us through the following methods or scan the QR code to get a quick response and a satisfactory solution.
Amazon Platform: “Contact Seller”
Official Website: www.viisan.com/en
Email Address: [email protected]
Use camera or QR scanner to scan 1 Or
Visit: https://viisan.afterservice.vip
https://viisan.afterservice.vip?utm_source=card&utm_medium=qrcode
WARRANTY CARD
Model No.: P2U
This product provides limited Warranty continues for one (1) year from the date of purchase.
| Name: | Email: |
|---|---|
| Address: |
Product S/N:
Reseller Info.:
Date of purchase:
EN V1.2
Documents / Resources
|
VIISAN P2U 2-in-1 Document Camera and
Webcam
[pdf] User Guide
P2U, 2-in-1 Document Camera and Webcam, P2U 2-in-1 Document Camera and Webcam
---|---