ACOUSTICS FS75 Speaker Stand Owner’s Manual
- June 4, 2024
- ACOUSTICS
Table of Contents
FS75 Speaker Stand
Owner’s Manual
option,
Q Active 200
Introduction
Thank you for purchasing a pair of Q Acoustics Q FS75 Floor Stands.
This manual is intended to take you through the setup and installation of the
Q FS75 Floor Stands. It will help provide a trouble-free setup and ensure
optimum performance from the product.
Please read the instructions, important safety information, and warnings
carefully before installation and use, to ensure the safe and satisfactory
operation of this product.
Designed to offer unprecedented unity when partnered with the Q Active 200
Speakers, the stand and speaker together deliver previously unimaginable
levels of performance and fidelity.
The Q FS75 Floor Stand has an extremely low surface area, which reduces re-
radiated sound to virtual nil. It’s less a speaker stand, and more an entirely
new loudspeaker support concept.
We hope you enjoy the Q Acoustics experience.
Important Safety Information and Warnings
Spikes should be fitted where floors are carpeted, for all exposed floors –
wood, tiled, etc use the rubber spike covers. To avoid damage when spikes are
fitted, do not drag the speaker and take care to place it where it cannot
cause damage or pierce main cables, etc. Used properly, spike feet will not
damage carpets.
The stand is pre-tensioned to precise torque. Check with your retailer if you
have any questions regarding this.
To clean use a lightly dampened cloth. Do not use abrasive cleaners or
cleaners containing solvents.
Do not use close to a strong heat source – radiators, heaters, or electrical
equipment. Do not expose the stands to excessive cold, heat, humidity, or
sunlight.
This product contains small items that could be a choking hazard if swallowed.
Do not overtighten the fixings.
For speaker setup and placement, refer to the full speaker manual.
Warranty
Q Acoustics passive loudspeaker products are warranted free of defects in
materials and workmanship for a period of 5 years from the date of purchase.
During the warranty period, Q Acoustics will, at its option, repair or replace
any product found to be faulty after inspection by the company or its
appointed distributor or agent.
Misuse and fair wear and tear are not covered by warranty.
Goods for repair should in the first instance be returned to the supplying
dealer. If this is not possible contact Q Acoustics or their appointed
distributor for your area to determine the correct warranty procedure. If
possible the original packaging should be used to return the product as damage
sustained during transit to the repair center is not covered by the warranty.
The warranty does not in any way affect your legal rights.
For service information
contact:support@qacoustics.co.uk
Q Acoustics
Woodside 2, Dunmow Road
Bishops Stortford, Herts, UK
CM23 5RG
For any additional info not contained within this manual, support questions,
and/or requests, please visit our online Knowledge Base Portal at
www.qacoustics.co.uk/faqs
Specifications
Weight and dimensions (per stand)
Weight
Dimensions (W x H x D)
2.28 kg (5.0 pounds)
286 x 638 x 338mm (11.26 x 25.12 x 13.31 Inches)
****Our policy is one of continuous product improvement.
We reserve the right to change the designs and specifications without notice.
This document contains information that is subject to change without notice.
Q17108-IS_r3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>