LEFTON BFWM2401 Wall Mounted Bathroom Faucet Instruction Manual
- June 28, 2024
- LEFTON
Table of Contents
LEFTON BFWM2401 Wall Mounted Bathroom Faucet
PACKING LIST
- Mixing Water Connector
- Pipe-fitting Adapter *2
- Rough-in Valve
- Sealant tape
- Hexagonal wrench *2
- Faucet|
- Faucet Decorative Cover
- Handle Decorative Cover
- Handle
- Hole Cover Cap
- Socket Set Screw – Corn Point
- Socket Set Screw – Flat Point
- Flat Head Screw *4
- Expansion tube *4
INSTALLATION STEPS
-
Wall groove cutting dimensions
-
Mark
Place the Rough-in Valve into the wall, mark the drilling positions, and drill four fixed-position holes. -
Install expansion tube
Insert the expansion tube into the drilled hole. -
Pipe connections
Nrap the sealing tape around the threads and connect the hot and cold water inlet pipes and the water outlet connector. -
Install Rough-in valve
Secure it to the wall using screws. -
Drilling hole size
-
Faucets and handle
Install the faucet and accessories in order. -
Mounting screws
Use a hexagonal wrench to install the screws.
Before installing the faucet, please be sure to clean any debris and sludge from the water pipes to prevent the faucet from getting clogged, which could affect the normal water flow.