VENAS EX G Explosion Proof Lights Instruction Manual

: June 4, 2024
: VENAS

Table of Contents

VENAS EX G Explosion Proof Lights
WARNING
Ceiling Mounting
Pendant Mounting
Wall mounting
Pole Mounting
Light pole mounting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VENAS EX G Explosion Proof Lights

VENAS-EX-G-Explosion-Proof-Lights-product

WARNING

READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING. KEEP THIS INSTRUCTIONS FOR FUTURE REFERENCE. Fixtures must be wired in accordance with the National electrical code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY QUALIFIED ELECTRICIANWHO IS FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDOUS INVOLVED.

Warning : Risk of fire or electric shock. Flood light installation requires knowledge of luminaires and electrical systems. DO NOT open the enclosure when energized. DO NOT try to install if not qualified. Please contact a professional electrician.
Warning : Risk of fire or electric shock. Suitable for wet locations. Make sure the power is off prior to installation.
Warning : Risk of fire or electric shock. Suitable for non-insulated surface and frame. DO NOT cover fixture with insulation liner or similar material.
Warning : DO NOT install in unstable, loose or breakable surfaces.
Warning : DO NOT let objects impact or exert force on the surface of the fixture.

Warning
Risk of fire, Electric shock or personal injury Please turn off power before installation!

Ceiling Mounting

Punch tapping on the top of the mounting.
Fix the lamp to the top with bolts.

Pendant Mounting

Sea the ring until the lamp body and the joint are tightened in the junction box, and tighten the set screw.
Pass the connector through the cable, screw in the steel tube, tighten the set screw, and then thread the cable through the spacer.

Wall mounting

Mount the lamp body on the wall through the bracket, and then pass the cable through the connector, gasket, and seal ring in sequence to the junction box.
Fix the lamp.