QUOIZEL FTS1716EK Fortress 3 Light 16 inch Earth Black Semi Flush Mount Ceiling Light Installation Guide

: October 30, 2023
: QUOIZEL

Table of Contents

QUOIZEL FTS1716EK Fortress 3 Light 16 inch Earth Black Semi Flush Mount
Product Information: FTS1716EK and FTS1716MM
Product Safety Information
Care and Maintenance
Product Package Contents
Product Installation Instructions
SAFETY INFORMATION
TOOLS REQUIRED
CARE AND MAINTENANCE
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUOIZEL FTS1716EK Fortress 3 Light 16 inch Earth Black Semi Flush Mount

Ceiling Light

Product Information: FTS1716EK and FTS1716MM

The FTS1716EK and FTS1716MM are ceiling fixtures that come with all the necessary hardware for installation. These fixtures have a modern design with a glass panel and a tube that connects to the ceiling canopy. The fixtures are compatible with medium base bulbs with a maximum wattage of 100W.

Product Safety Information

The fixture should be installed by a licensed electrician. Turn off the power supply before installation. Do not use bulbs with wattage exceeding the maximum recommended wattage. Do not touch the bulbs with bare hands as it may damage the bulb or reduce its lifespan.

Care and Maintenance

Use a soft, dry cloth to clean the fixture. Do not use abrasive cleaners or solvents as they may damage the finish. If you need further assistance, contact Quoizel Customer Care at 1-800-645-3184 or visit their website at www.quoizel.com.

Product Package Contents

Ceiling Canopy
Tube x1
Glass Panel C x4
Fixture Body x1
Crossbar Assembly AA x1
Wire Connector BB x3
Outlet Box Screw CC x2
Rubber Washer E x8
Lock Screw F x8

Product Installation Instructions

Install Tube and Ceiling Canopy Assembly: Attach the tube to the ceiling canopy using the screws provided in the package.
Install Glass Panels: Insert glass panels into the fixture body and secure them using rubber washers and lock screws.
Install Crossbar Assembly: Attach the crossbar assembly to the outlet box using outlet box screws.
Wiring: Connect the white wire from the power supply to the white wire from the fixture. Connect the black (or red) wire from the power supply to the black wire from the fixture. Connect the ground wire from the power supply to the ground wire from the fixture using the green ground screw.
Install Ceiling Canopy to Crossbar Assembly: Attach the ceiling canopy to the crossbar assembly using the screws provided in the package.
Install Bulbs: Install three medium base bulbs with a maximum wattage of 100W. Refer to fixture markings and/or labels for bulb type.
Restore electricity and save this sheet for future reference.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING

RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

For your safety, read the instructions completely before beginning installation.
If in doubt about electrical installation, consult a licensed electrician.
Turn off the electricity to the fixture before replacing the bulb(s).

TOOLS REQUIRED

CARE AND MAINTENANCE

Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixtures as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us online at www.quoizel.com.