TP-Link TL-SF1009P 9-Port 10/100Mbps Desktop Switch Specifications and Datasheet

: October 30, 2023
: tp-link

Table of Contents

Highlights
Overview
POWER OVER ETHERNET
Highlight Performance
Easy to Use
Specifications
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TP-Link TL-SF1009P 9-Port 10/100Mbps Desktop Switch

TP-Link-TL-SF1009P-9-Port-10-100Mbps-Desktop-Switch-with-8-Port-
PoE+-PRODUCT

Highlights

With eight PoE+ ports, transfers data and power on one single cable
Working with IEEE 802.3af/at compliant PDs expands your network
Supports PoE power up to 30 W for each PoE port
Supports PoE power up to 65 W* for all PoE ports
Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance system
Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive application
Isolation Mode allows one-click client traffic separation for higher security and performance
Requires no configuration and installation

Overview

TL-SF1009P is an unmanaged switch with 9 10/100Mbps ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras, or IP Phones, etc

POWER OVER ETHERNET

8 of the 9 Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).

Overload Arrangement

TL-SF1009P has a priority function that will help protect the system when the system power is overloaded. If all PoE PD’s power consumption is ≥ 65 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Intelligent Power Management

Priority (port 1 = port 2 = port 3 > port 4): This function will help protect the system when the system power is overloaded. For example, ports 1, 2, and 4 is using 20 W (maximum power per port is 30 W); the system power is 60 W in total. If there is an additional PD inserted to port 3 with 20 W, then the system will cut off the power of port 4 because of the overloaded power, this means ports 1, 2, and 3 will use 20 W, and no power will be supplied to port 4.

Highlight Performance

Up to 250 m PoE power supply and data transmission under Extend Mode**.
Priority Mode ensures high priority of ports 1–2 to guarantee the quality of sensitive applications.
Isolation Mode easily divides traffic for ports 1–8 to avoid snooping and tampering, which improves LAN security and performance.

Easy to Use

TL-SF1009P is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance, and quality, the TP-Link 9-Port 10/100Mbps Desktop Switch with 8-Port PoE+ TL- SF1009P is a great selection for expanding your network.

Specifications

Hardware Features & Performance

Product Picture|
Model| TL-SF1009P
Standards| IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Network Ports| 9 * 10/100 Mbps RJ45 ports with 8 PoE+ ports (port 1 to port 8)

Network Media (Cable)

| 10Base-T: UTP category 3, 4, 5 cable (maximum 100 m) EIA/TIA-568 100 Ω STP (maximum 100 m)

100Base-TX: UTP category 5, 5e cable (maximum 100 m)

EIA/TIA-568 100 Ω STP (maximum 100 m)

PoE

| PoE Standard: IEEE 802.3af, IEEE 802.3at PoE Port 1–8, up to 30 W per port

PoE Power Budget 65 W*

Auto-Negotiation| YES
Auto MDI/MDIX| YES
PoE Power on RJ45| Power+: pin 3 & pin 6

Power -: pin 1 & pin 2

Max Power Consumption| 3.7 W (220 V/50 Hz no PD connected)

77 W (220 V/50 Hz with 65 W* PD connected)

Max Heat Dissipation| 12.617 BTU/h (no PD connected)

262.57 BTU/h (with 65 W* PD connected)

Storage Humidity: 5% to 90% RH, non-condensing

Note:

PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary on the quality of the cables.

www.tp-link.com
Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

FREQUENTLY ASKED QUESTIONS

What is the TP-Link TL-SF1009P 9-Port Desktop Switch?

The TP-Link TL-SF1009P is a 9-port Ethernet switch designed for desktop use, providing high-speed 10/100Mbps connectivity.

How many ports does the TL-SF1009P have?

The TL-SF1009P has a total of 9 ports.

What is the purpose of the TL-SF1009P switch?

The switch allows you to expand your wired network by connecting multiple devices using Ethernet cables.

Does the TL-SF1009P support Power over Ethernet (PoE)?

Yes, the TL-SF1009P supports Power over Ethernet (PoE) on 4 of its ports, allowing you to power compatible devices such as IP cameras or VoIP phones directly through the Ethernet cable.

What is the maximum PoE power budget of the TL-SF1009P?

The TL-SF1009P has a maximum PoE power budget of 57W.

What is the maximum data transfer speed of the TL-SF1009P?

The TL-SF1009P supports a maximum data transfer speed of 10/100Mbps.

Does the TL-SF1009P support auto MDI/MDIX?

Yes, the TL-SF1009P supports auto MDI/MDIX, which means you can use either straight-through or crossover Ethernet cables to connect devices to the switch.

Is the TL-SF1009P a managed switch?

No, the TL-SF1009P is an unmanaged switch, which means it operates without the need for configuration or management software.

Can the TL-SF1009P be mounted on a wall?

No, the TL-SF1009P is designed for desktop use only and does not have mounting options.

Does the TL-SF1009P support VLANs?

No, the TL-SF1009P does not support VLANs. It is a basic switch without advanced networking features.

What is the power input for the TL-SF1009P?

The TL-SF1009P requires an external power adapter with an input voltage of 100-240V AC and an output voltage of 9V DC.

Is the TL-SF1009P fanless?

Yes, the TL-SF1009P is a fanless switch, which means it operates silently and does not require any cooling fans.

Can the TL-SF1009P prioritize traffic?

No, the TL-SF1009P does not support Quality of Service (QoS) features to prioritize traffic.