V I V O DESK-VE36K Black Electric Desk Riser Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Black Electric Desk Riser
Instruction Manual
DESK-VE36K Black Electric Desk Riser
SKU: DESK-VE36K
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-ve36k
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the worksurface. Failure
to follow these instructions may result in serious personal injury. DO NOT
EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Separate the sleeve nut with screw (C) into (C1) and (C2).
STEP 2
Apply Pads (E) to underside of Keyboard Tray (B). Press Sleeve Nut (C1) into
holes on top of Keyboard Tray (B).
STEP 3
Install Feet (F) to the bottom of Desk (A). Then cut the large plastic safety
tie. Plug Desk (A) into a wall outlet, and press the up arrow on the control
panel to fully raise the desktop.
STEP 4
Place Keyboard Tray (B) on metal brackets on Desk (A). While holding Sleeve
Nuts (C1), secure Keyboard Tray (B) to brackets using Screws (C2) and tighten
with a Phillips screwdriver.
STEP 5
Apply cable clips (D) to underside of desk.
STEP 6
If installing a monitor mount, remove the plug from the desktop, then secure
the mount using grommet mounting hardware included with your monitor mount.
CAUTION!
| | | 
---|---|---|---
Keep monitor and laptop base fully on the desktop.| Follow the cable routing
instructions to avoid the potential to
pinch cables.| Leave enough slack in cable to allow for full range of vertical
motion (15” / 38 cm).| Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/23/2022
REV2
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 36" Electric Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>