2.4 Inch LCD Screen Wireless Baby Monitor System User Guide

WIRELESS BABY MONITOR SYSTEM
2.4″LCD SCREEN ****

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician  for the replacement of the obsolete outlet
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the art/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged,  liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. does not operate normally or has been dropped.

WARNING

• STRANGULATION HAZARD-Keep cord out of child’s reach. NEVER place cameras or cords within 3 feet of the crib or playpen. Never use extension cords with AC  Adapters. Only use the AC Adapters provided. Some adult assembly or installation is required.
• This product contains small parts that may cause choking. Keep small parts away from children
• This product is NOT intended to replace proper supervision of children. you must check your child’s activity, as this product will not alert parents to the silent activities of a child.
• Before using this product, read and follow all instructions contained in this booklet, and read and follow all instructions and warnings on the product.
• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc. This product is intended for indoor use only.
• This product is not intended for use as a medical monitor and, its use should not replace adult supervision
• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range if may not be able to detect sounds from him or her Itis essential that you check the operating range and condition of the transmitter monitor on initial installation, and on a regular basis after that «Check reception regularly Test monitor before use and after changing camera location.

The wireless signal transfer range may be shortened if an obstacle such as a concrete wall in between the camera and monitor.
To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens), and other appliances that produce heat (e.g., amplifiers, televisions, and stereos).

• Ensure that the product is well-ventilated during use. Avoid contact with pillows and furniture that may block ventilation.
  Use only the AC adapters provided with the product, as other adapters may damage the product Plug the adapters only into standard household current (100-240 volts AC).

• Place the AC adapters avoiding pinch points otherwise, you can damage the adapters.

• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC adapter’s cord.

• Do not use extension cords with AC power adapters to avoid entanglement.
  This product should only be serviced by qualified and authorized service centers

• Caution if you use the system to watch a young child, do not place the camera where the child can reach

• When using the system with only battery power and the charge is low, then the picture and or sound may be affected. if this occurs then please connect the AC power adapter.

WHAT’S INCLUDED

Package Contents

OVERVIEW

Wireless Camera
Front Controls

Wireless Monitor
Front Controls

VIEWING MODE DISPLAY

MENU

SETUP STEPS
Press to open/close/return the main menu. Press” “to choose the function. Press the” “button to enter the submenu/confirm the function.
INTERCOM
Press on the monitor to talk to the camera. Lose the button to hear the sound from the camera.(default state)
PAIR
Press then press the” ‘button to enter this option, and press ‘ the” button again to confirm, the led indicator will be flashing, Meanwhile, press the pair button behind the camera for 3s

INSTALLATION

How to Install
CAUTION: If you use the system to watch a young child, do not place the camera within the child’s reach.
Wireless Monitor

1. Place the monitor in a place that will have clear reception with your camera(s).
2. Adjust the stand

Wireless Camera
Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting the permanent installation, verify its performance by observing the image on the monitor when the camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time.

Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD Keep the cord out of the child’s reach. NEVER place cameras or cords within 3 feet of the crib or playpen. Only use the AC Adapters provided

1. carefully to unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation.
2. Mount the camera to the wall or a suitable place.
3. Adjust the viewing angle of the camera

SPECIFICATION

System General

Wireless Camera

Wireless Monitor

TROUBLESHOOTING

the adapter is plugged in
2. Make sure that the cameras and monitor are both ON.
3. Make sure that the camera is in range of the monitor.
4. Make sure the camera and monitor are paired.
The picture is or has become choppy| The picture may become choppy when experiencing a lower frame rate (i. e.10 frames per second vs. a higher 20 frames per second).
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and the camera.
No sounds (even with both units turned on)| 1. Make sure that the power adapter is connected to the camera.
2. The battery on the monitor may be dead, be sure to charge it using the adapter included.
3. The monitor may be out of range of the camera
Emitting an high pitched noise/ feedback.| This sound is normal feedback which occurs if the monitor and camera are too close together. Move them further apart.

SPECIFICATION

• RF Range : 2400-2483.5MHz
• Image Sensor: 1/6.5″COMS
• Horizontal Viewing Angle:60°
• Power Supply: DC 5V 1A
• Display Size : 2.4″TFT LCD monitor
• Screen Resolution : 320*240pixels
• IR Range: 5m
• Wireless Transmission : 150m(outdoor)

FEATURES

• 2.4″TFT LCD
• Two-way talk
• Night vision
• Zoom in/ out
• Alarm setting
• Lullaby playing
• ECO mode
• No signal warning
• Low power warning
• Private signal

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>