HOME DECORATORS COLLECTION HD5100SF1 Hiddenbrook 15 Inch 3 Light Semi Flush Mount User Guide
- October 30, 2023
- HOME DECORATORS COLLECTION
Table of Contents
Item # 1008 779 367 / 1008 779 370
Model # HD5100SF1 / HD5100SF2
USE AND CARE GUIDE
3-LIGHT SEMI-FLUSH MOUNT Questions, problems, missing parts? Before
returning to the store, call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators
Collection through the purchase of this light fixture.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it is not live.
- When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove the cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children, place a safety cover over any unused outlets.
DANGER: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker,
removing the fuse at the fuse box, or tripping the breaker that controls that
circuit. Tape a sign to the panel warning others to leave the circuit alone
while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any non-electrical questions about this fixture, please
call our Customer Service Team at 1-800-986-3460 or visit
HOMEDEPOT.COM/HOMEDECORATORS. Please
reference the model and item numbers.
Warranty
FIVE (5) YEAR WARRANTY
WHAT IS COVERED The manufacturer warrants this fixture to be free from
defects in materials and workmanship for a period of five (5) years from the
date of purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If this product
is found to be defective, the manufacturer’s only obligation and your
exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged
through misuse, abuse, accident, modifications, alteration, neglect, or
mishandling. This warranty shall not apply to any product that is found to
have been improperly installed, set up, or used in any way not in accordance
with the instructions supplied with the product. This warranty shall not apply
to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, faulty installation, or any other failure not relating
to faulty material or workmanship. This warranty shall not apply to the finish
on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit
HOMEDEPOT.COM/HOMEDECORATORS.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installing.
- To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or
exposed copper that may have occurred during shipping. If there is a defect in
the wire, do not attempt installation. Please call the Customer Service Team
at 1-800-986-3460.
NOTE: This product requires three 60W candelabra base bulbs or LED
equivalent (sold separately)
TOOLS REQUIRED (NOT INCLUDED)
HARDWARE INCLUDED
NOTE: Hardware is not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Crossbar assembly (Pre-assembled to ceiling canopy) | 1 |
BB | Outlet box screw | 3 |
CC | Wire connector | 2 |
Pre-Installation (continued)
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Shade | 1 |
B | Ceiling canopy | 1 |
C | Rod | 1 |
D | Spider | 1 |
E | Socket assembly | 1 |
Installation
-
Testing ceiling canopy fit to the crossbar assembly
Fit the the ceiling canopy (B) of the fixture body to the crossbar assembly (AA) and secure with the mounting balls (1).
If they do not align, adjust the length of the mounting screws on the crossbar assembly (AA) by unscrewing the preassembled hex nuts.
Screw the mounting screws in or out of the crossbar until the desired length is achieved.
Once the fixture body is secure, remove the mounting balls (1) and the fixture body and proceed to Step 2.
NOTE: The ceiling canopy should be snug against the ceiling and the mounting balls (1). -
Installing the ceiling canopy and the shade
Guide the fixture wire with the bare copper ground wire through the spider (D), the rod (C) and ceiling canopy (B).
Thread the ceiling canopy (B), the spider (D), the rod (C) and the socket assembly (E) together as shown. Hand-tighten until snug.
Remove the mounting balls (1) from the spider (D).
Pass the bolt of the spider (D) through the holes of the shade (A) and secure with the mounting balls (1). Hand-tighten until snug. -
Installing the crossbar assembly
Unscrew the two mounting balls (1) from the crossbar assembly (AA).
Remove the crossbar assembly (AA) from the ceiling canopy (B) and keep the crossbar assembly (AA) and two mounting balls (1) for later use.
Secure the crossbar assembly (AA) to the outlet box (not included) with the outlet box screws (BB). Tighten until snug. -
Making the electrical connections
Ground Wire:
Wrap the supply ground wire around the green ground screw on the crossbar assembly (AA), no less than 2 in. from the end of the wire. Tighten the ground screw.
Connect the fixture ground wire to the supply ground wire with a wire connector (CC).
Supply Wire:
Connect the supply white wire to the white fixture supply wire with a wire connector (CC).
Connect the supply black (or red) wire to the black fixture supply wire with a wire connector (CC).
Wrap each connection with approved electrical tape and carefully insert all of the connected wires into the outlet box. -
Attaching the fixture body to the outlet box
Reattach the ceiling canopy (B) of the fixture body to the crossbar assembly (AA).
Secure with the previously removed mounting balls (1). -
Installing the light bulbs
Install the correct bulbs (not included) referring to fixture markings and/or labels for maximum wattage.
NOTE: Uses three 60W candelabra base bulbs or LED equivalent (sold separately).
Care and Cleaning
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
- To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
The light(s) will not turn on. | The bulb is burned out. | 0 Replace the light |
bulb.
The power is off.| o Ensure the power supply is turned on.
There is a faulty switch.| 0 Test or replace the switch.
There is a faulty wire connection.| 0 Check the wiring.
The fuse blows or the circuit breaker trips when the light is turned on.|
There are crossed wires, or the power wire is grounding out.| 0 Discontinue
use of the light.
0 Check the wire connections.
■ Contact a qualified electrician or call the Customer Care
Service Team at 1-800-986-3460.
Service Parts
MODEL: HD5100SF1 / HD5100SF2
Part | Description |
---|---|
AA | Crossbar assembly |
BB | Outlet box screw |
CC | Wire connector |
A | Ceiling canopy |
B | Shade |
C | Rod |
D | Spider |
E | Socket assembly |
Questions, problems, missing parts? Before returning to the store, call Home
Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>