VEVOR TM-5 Chicken Plucker Machine User Manual

VEVOR TM-5 Chicken Plucker Machine

Product Information: Chicken Plucker Machine

The Chicken Plucker Machine is an electric-powered device that is used to remove feathers from chickens, ducks, and geese. The machine has a capacity of 2-4 chickens at a time and has a temperature control switch with overload protection function. It has a waterproof rating and weighs 25.7 kg. The machine comes with various parts such as handle, finger, barrel body, stabilizer blade, drain connection, wheel, leakage protection plug, switch, electric motor, and high-pressure nozzle. The machine is manufactured by Zibo Shengyan Agricultural and Animal Husbandry Equipment Factory in China.

Product Usage Instructions:

1. Check all accessories to ensure that all parts are included.

2. Install the drain pipe by holding both sides of the drain pipe mouth with two hands and inserting it directly into the base drain mouth.

3. Install the wheels on the leg and tighten the screws.

4. Install the leg with wheels by corresponding the serial number of the support leg with wheels to the serial number on the baseplate one by one. Insert the support leg with wheels into the corresponding baseplate slot, insert the screws, and tighten the
   nuts onto the screws with a wrench.

5. Install the handle by putting the screws into the holes at both ends of the handle. Insert the screws on the handle into the two screw holes at the barrel mouth. Finally, lock the screws with nuts inside the barrel and tighten them with a screwdriver.

6. Connect the plug to the power supply and turn on the machine.

7. After 2-3 minutes, remove the feathers and take out the chicken. Connect the high-pressure nozzle with a water pipe. Spray and rinse off the poultry feathers.

Problem and Solution:

If you encounter any problems while using the Chicken Plucker Machine, refer to the following table for troubleshooting:

cord is not plugged in
properly, switch 1 is not pressed| Uniform scalding temperature, plug the power cord, press switch
1
Locked rotor protection in progress| Remove the obstruction| Wait for 30s

Please read the entire user manual carefully before operating the Chicken Plucker Machine. If you have any product questions or need technical support, please contact CustomerService@vevor.com.

Support and E-Warranty Certificate
https://www.vevor.com/support

We continue to be committed to offering tools at competitive prices. “Save Half”, “Half Price”, or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

For your safety and the safety of others, the following
precautions must be observed when operating the chicken plucker machine:

1. Ensure the safety of the power supply: install the leakage switch on the grounding wire of the chicken, duck, and goose plucker. Before use, plug in the power supply and turn on the switch to check whether the rotary table operates normally.
2. Picking safety: To ensure user’s safety, do not retrieve the bird unless the chicken plucker machine has come to a complete stop.

WARNING:

1. Turn off the power when not in use.
2. Do not disassemble or change this machine.
3. In the operation process, if the machine sounds abnormal, it must be stopped immediately for inspection and continue to work only after the fault is eliminated.

MODEL AND PARAMETERS

Temperature control switch (overload

protection function)

| 110° temperature control off
Waterproof Rating| IP54
N.Weight| 25.7Kg
G.Weight| 29.65Kg

STRUCTURE DIAGRAM

ASSEMBLY AND USE

Step 1: Check all accessories.

Step 2 : Installation of the drain pipe.

First, hold both sides of the drain pipe mouth with two hands. Then, aim at the base drain mouth and insert it directly.

Step 3 : Installation of wheels.

Install the wheel on the leg and tighten the screws.

Step 4:Installation of leg with wheels.

First, directly correspond the serial number of the support leg with wheels to the serial number on the baseplate one by one. Then, insert the support leg with wheels into the corresponding baseplate slot, insert the screws, and tighten the nuts onto the screws with a wrench.

Step 5: Installation of handle.

First, put the screws into the holes at both ends of the handle. Then, insert the screws on the handle into the two screw holes at the barrel mouth. Finally, lock the screws with nuts inside the barrel and tighten them with a screwdriver.

Step 6: Connect the plug to the power supply and turn on the machine.

Step 7: The knife edge should be as small as possible when the chicken is slaughtered.
After slaughter, the chicken should be soaked in warm water (about 30 ℃) to make feathers wet. It is better to put some salt in warm water to avoid skin damage due to depilation.

Step 8: Heat the soaked chicken in hot water of about 70 ℃ and stir with a wooden stick to make it heated evenly.
Step 9: Put 1 to 4 hot chickens in the machine at a time.
Step 10: Press the “1” switch key to start the machine. Water is added to the poultry while it is running. The feathers and dirt that fall off flow out with the water. The water can be recycled.

Step 11: After 2-3 minutes, remove the feathers and take out the chicken. Connect the high-pressure nozzle with a water pipe. Spray and rinse off the poultry feathers.

TROUBLESHOOTING INSTRUCTION

Uneven scalding

temperature

| Uniform scalding temperature

chicken plucker machine does not rotate

| The power cord is not plugged in properly| Plug the power cord
Switch 1 is not pressed| Press switch 1
Locked rotor protection in progress| Remove the obstruction, Wait for 30s.

CLEAN, CARE AND STORAGE RULES

Care and cleaning:
The chicken plucker machine needs to be used with a faucet and a water pipe, making it convenient for feathers cleaning and keeping the neatness and beauty of the machine. The chicken plucker machine is made of stainless steel, which is not easy to rust. After use, please clean it with tap water and wipe it.
Timely cleaning: After use, the bucket should be washed with water, but not directly with a water spray pipe. The feathers and dirt that have been removed should be collected with the water flow and treated in time to avoid environmental pollution or harm to human health. Water can be recycled, but it should be removed in time when not in use.

Storage :
Please store it out of the reach of children.
When the chicken plucker machines are not used for a long time, they should be stored in a dry, non-corrosive environment. Do not contact corrosive substances to avoid product damage.
Manufacturer： Zibo Shengyan Agricultural and Animal Husbandry Equipment Factory
Add ：East Side of Qiancao Village, Yucheng Town, Boshan District, Zibo City, Shandong Province
Made in China

Support and E-Warranty Certificate https://www.vevor.com/support

References

• 百度翻译-200种语言互译、沟通全世界！
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>