Haier 5U125S2PN1FA Super Match Multi Head Outdoor Air Conditioner User Guide

: October 30, 2023
: Haier

Table of Contents

Haier 5U125S2PN1FA Super Match Multi Head Outdoor Air Conditioner
DIMENSIONS
FEATURES & BENEFITS
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Haier 5U125S2PN1FA Super Match Multi Head Outdoor Air Conditioner

Product Information

The 5U125S2PN1FA is a multi-head outdoor unit with a cooling and heating capacity of 12kW. It is part of Haier’s Super Match range and can be paired with various indoor units for a customized multi-room air conditioning solution. The unit features DC inverter
technology, and anti-corrosion coating, and uses next-generation R32 refrigerant. It also has an easily accessible maintenance panel and service screen for faster servicing, and an optional central controller for easy control of individual or connected units.

Dimensions

Height : 965mm
Width : 950mm
Depth : 370mm

Specifications

Cooling capacity: 12kW
Heating capacity: 12kW
Consumption: COP 4.10, EER 3.40
Features: Blue fin coils, DRED (Demand Response) ready compressor, inverter controlled compressor, MEPS approved, R32 Refrigerant factory charge
Installation: Liquid line 5x 6.35mm, Maximum number indoor units 5, Maximum pipe run 100m, Suction line 3x 9.52 + 2x 12.7mm
Performance: Airflow DC inverter, Sound power SWL (outdoor), Sound pressure SPL (outdoor), Working temperature cooling, Working temperature heating
Power requirements: AMP draw 15.5A, Power phase Single, Supply frequency 50Hz, Supply voltage 220-240V
Product dimensions: Height 965mm, Width 950mm, Depth 370mm, Net weight 79kg
Warranty: 5 years parts and labor

Product Usage Instructions

To use the 5U125S2PN1FA multi-head outdoor unit, follow these steps:

Install the unit with the appropriate indoor units for your space. Refer to the installation instructions in the user manual for guidance.
Connect the liquid and suction lines according to the specifications provided.
Connect the unit to a power source with a power phase of single, supply frequency of 50Hz, and supply voltage of 220-240V.
To turn on the unit, use the optional central controller or the individual unit controls.
You can control the temperature and schedule air conditioning to turn on and off automatically using the optional central controller.
If servicing is needed, use the easily accessible maintenance panel and service screen for fast diagnostics.

Part of our Super Match range, this outdoor unit can be paired with various indoor units for a complete multi-room air conditioning solution.

Heating and cooling, with an operational range from -15°C to 46°C
Outdoor unit connects to up to five indoor units
High-efficiency DC fan motor
Indoor unit options include cassette, slim ducted and high wall models

DIMENSIONS

Height
965mm
Width
950mm
Depth
370mm

FEATURES & BENEFITS

Flexible combinations
The Super Match range offers a wide range of possible indoor unit and outdoor unit combinations, for a customised air conditioning solution for your space.
DC inverter technology
With 3D Direct Current (DC) inverter technology, Super Match air conditioning units are able to operate with a high level of energy efficiency, while delivering rapid heating and cooling as needed.
Anti-corrosion coating
The Blue Fin coating on the evaporator is hydrophilic for quick water drainage and resistance against corrosion.
R32 refrigerant
This Super Match outdoor unit uses a next-generation R32 refrigerant, which carries heat efficiently and has a lower Global Warming Potential than R410A.
Faster servicing
An easily accessible maintenance panel and service screen enable fast diagnostics.
Central controller
With an optional central controller, you can easily control individual or connected units, and schedule air conditioning to turn on and off automatically.

SPECIFICATIONS

Capacity
- Cooling capacity (kW)
  12kW
- Heating capacity (kW)
  12kW
Consumption
- COP
  4.10
- EER
  3.40
Features
- Blue fin coils
  •
- Compressor type Twin rotary DRED (Demand Response) ready
  •
- Inverter controlled compressor
  •
- MEPS approved
  •
- Refrigerant factory charge
  2.5kg
Installation
- Liquid line
  5x 6.35mm
- Maximum number indoor units
  5
- Maximum pipe run
  100m
- Suction line
  3x 9.52 + 2x 12.7mm
Performance
- Airflow
  4200m3/h
- DC inverter
  180° sine wave
- R32 Refrigerant
  •
- Sound power SWL (outdoor)
  73dBA
- Sound pressure SPL (outdoor)
  58dBA
- Working temperature cooling
  -10°C to +46°C
- Working temperature heating
  -15°C to +24°C
Power requirements
- AMP draw
  15.5A
- Power phase
  Single
- Supply frequency
  50Hz
- Supply voltage
  220-240V
Product dimensions
- Depth
  370mm
- Height
  965mm
- Net weight
  79kg
- Width
  950mm
Warranty
- Parts and labour
  5 years
SKU
51630

The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. ? 2020 Haier Inc. All rights reserved.

Other product downloads available athaier.com